K&N Oil Breather Cap With 3/4" Flange Push-In 1965-1985

K&N: 62-1519
MSRP: $40.69
CJ's Low Price:
$25.99
1475193600 27076
Pick up the grommets that this cap will push into as well!
Earn 25 RPM Points What's this?
K&N Oil Breather Cap With 3/4" Flange Push-In 1965-1985
K&N Oil Breather Cap With 3/4" Flange Push-In 1965-1985 K&N Oil Breather Cap With 3/4" Flange Push-In 1965-1985 K&N Oil Breather Cap With 3/4" Flange Push-In 1965-1985 K&N Oil Breather Cap With 3/4" Flange Push-In 1965-1985 K&N Oil Breather Cap With 3/4" Flange Push-In 1965-1985 K&N Oil Breather Cap With 3/4" Flange Push-In 1965-1985 K&N Oil Breather Cap With 3/4" Flange Push-In 1965-1985
K&N

Product Description

K&N Push-In Oil Breather Cap with a 3/4" Flange for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984 and 1985 Mustangs.

Continue to update your 1965-1985 Mustang by purchasing K&N's Push-In Oil Breather Cap that will easily push into place. Otherwise known as a crankcase vent filter, this cap is fantastic whether you are looking to race your Pony on the track or show off your Mustang's look & aesthetics at a show.

Features & Benefits:
- Designed for Racing with Enough Style for Show
- Constructed with Cotton Filter Media
- Chrome-Plated Shield & Top Plate
- Zinc Steel Base Plate
- 3" Outside Diameter of Filter
- Pushes Into Rubber Grommets in Valve Covers
- 3/4" Diameter Vent Tube
- Includes Deflector Shield to Protect Against Engine Heat
- Washable & Reusable
- Comes with Pillow Pack of K&N Air Filter Oil

This oil breather cap from K&N has a design that is best for racing applications however there is still plenty of style & grace for your show car. It has a cotton filter media construction that is both washable & reusable so you won't have to worry about buying another one. K&N's filter also has an outside diameter of three inches and comes with a deflector shield for protection against heat from your motor.

This cap also features a shield & top plate that come with a chrome plated finish for an appealing style and increased durability. The base plate of this oil breather cap is made of zinc plated steel and comes with an attached vent tube. The 3/4" diameter of this vent tube is designed to push directly into the rubber grommets in your Mustang's valve covers, mounting this cap into place. K&N also makes sure to include a pillow pack of their air filter oil when you make this purchase.

K&N Engineering is the world's leading manufacturer of washable performance air filters & air intake systems. K&N invented the reusable high flow cotton air filter and has been perfecting their technology ever since. CJ Pony Parts proudly offers a great variety of parts from K&N for your Mustang that you can check out today!

Go ahead and order this K&N Push-In Oil Breather Cap for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984 or 1985 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Gaskets, Breathers & Hardware  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 76.57ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

Product Questions

I have a 6 cyl 200ci engine I bought the EDUK1 chrome valve cover kit for it, my engine does not have a pcv valve in it. i need something to plug up the rear hole where it would go I was wondering if the OC11 oil breather cap will fit snugly in the gromet

Asked by: Bagheera5th
  • 2016-09-23T08:04CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_OC11, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 80.71ms
  • QUESTIONS, PRODUCT

You Might Also Like