LED Flasher Two Terminal Mustang 1965-1969/Bronco 1966-1977

CJ's Part Number: HW2811
CJ's Low Price:
$14.99
1481241600 19704
Earn 14 RPM Points What's this?
LED Flasher Two Terminal Mustang 1965-1969/Bronco 1966-1977
LED Flasher Two Terminal Mustang 1965-1969/Bronco 1966-1977 LED Flasher Two Terminal Mustang 1965-1969/Bronco 1966-1977 LED Flasher Two Terminal Mustang 1965-1969/Bronco 1966-1977 LED Flasher Two Terminal Mustang 1965-1969/Bronco 1966-1977 LED Flasher Two Terminal Mustang 1965-1969/Bronco 1966-1977

Product Description

Two Terminal LED Flasher for all 1965, 1966, 1967, 1968 and 1969 Mustangs and 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 and 1977 Broncos.

Considering upgrading your 1965-1969 Mustang or your 1966-1977 Bronco to LED parking or tail lights? Don't forget this essential Two Terminal LED Flasher to make everything work properly in your vehicle's electrical system!

This Two Terminal LED Flasher is required when using LED parking lights (PLLED1) and LED tail lights (TLLED12, TLLED13 or TLLED14). When using LEDs, your vehicle's stock flasher mechanism cannot engage properly, due to less heat given off from the LEDs than original bulbs. The two terminal flasher allows your flashers/turn signals to work properly when using LED style lights. Install is simple and easy and your classic Ford's electrical system will work more efficiently.

Please Note: LED parking and tail lights are all sold separately.
Tech Tip: Your 1965-69 Mustang or 1966-1977 Bronco will only require one LED Flasher if you have LED parking lights and tail lights.

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has what you need to complete your classic Mustang restoration with ease! CJ Pony Parts has all the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order a Two Terminal LED Flasher for your 1965, 1966, 1967, 1968 or 1969 Mustang or your classic 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 or 1977 Bronco from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Parking Lights  

Similar Bronco Parts

similar Bronco parts More LED Lighting  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Bronco Applications

This product will fit the following Ford Bronco years:

Product Reviews

Write a review
LED Flasher Two Terminal Mustang 1965-1969/Bronco 1966-1977 is rated 4.2 out of 5 by 16.
Rated 1 out of 5 by from Did not work! I purchased this flasher when I installed LED Tail Lights and Front Turn Signal Lights in my 67 Mustang. With the ignition on (engine not running) everything worked fine. When I started the car, the turn signals would not work correctly. They would flash, stop flashing, stay on, turn off, etc. Thinking I might have a bad flasher, I ordered a new one and had the same results. Thinking it might be the ground, I ran the ground wire to two different locations with the same results. As a last resort I went to AutoZone and purchased an light duty flasher. Installed this new flasher and everything works perfect. I might add that this car has a new AAW wiring system.
Date published: 2015-09-02
Rated 5 out of 5 by from Nice! This product is quality and very useful! It's fairly easy to install if you know where to look!(upper left hand of your dash the original one is brass And is mounted on the back of your driver side air vent) this product saved me!
Date published: 2015-01-08
Rated 5 out of 5 by from Led flasher Easy to install and works well in conjunction with the LED taillights I purchased. I wish the ground wire was a little longer though, it was a little more difficult to find a good place to ground it.
Date published: 2015-07-21
Rated 1 out of 5 by from Did not work I purchased this flasher to go with the LED front turn signals that I bought before from CJ. I already had LED on the back and they work great. When I installed the LED on the front they would not work. Both would flash at the same time. So am back to the original bulbs in the front.
Date published: 2015-12-27
Rated 5 out of 5 by from Easy to install, glad I did. I bought this when I bought my LED taillights. It was easy to install and worked perfectly. Nice to have bright working taillights. Doesn't quite fit the bracket that held my old flasher, but no one is going to look behind my vent.
Date published: 2016-02-28
Rated 5 out of 5 by from great flasher I had bought new tail lights but did not realize you needed a new type flasher. just thought it was a direct plug in ready to go. Found out I needed LED flasher . Ordered. works great and easy to install
Date published: 2016-01-28
Rated 4 out of 5 by from Works great, thanks I bought this to add LED brake lights to my 1966 Mustang, It was very easy to hook up.
Date published: 2015-08-08
Rated 1 out of 5 by from Don't work I ordered thie flasher to work with the LED front turn signals that I bought before from CJ.Pony. I already had LED on the back and they work great with analogue flasher. When I installed the LED on the front they would not work correctly. Both leds flash at the same time, with no light in the LED back or dash. Now I am back to the original bulbs in the front and almost $200 poorer
Date published: 2016-08-27
  • y_2016, m_12, d_7, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_HW2811, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 115.41ms
  • REVIEWS, PRODUCT

Product Questions

I NEED TO REPLACE MY BLINKS FLASHER WERE IS IT ! 1965 MUSTANG

Asked by: FISHER
It should be around the drivers side fresh air vent.
Answered by: rk cjpp
Date published: 2016-10-06

I have installed front and rear LED lights, PLLED1 and TLLED12, along with the HW2811 flasher. Everything works like it's supposed to with the exception of the front turn signals, with both flashing when turning left OR right. Bad flasher? Any ideas?

Asked by: Doughead
65 with Falcon style instrument panel has a single turn lamp. This lamp connects the left to right front turn lamps. Check out the Moss Motor website for an explanation. Two options are available 1) replace dash turn indicator bulb with a grounded double bulb as included in the Scott Drake LED instrument bulb kit, or 2) add load resistors to each front turn lamp. Either solution shoukd stop the low current sneak path that will light an LED but not an incandescent bulb. 
Answered by: 1275GT
Date published: 2016-09-24

Will I need to purchase a led flasher for my emergency flasher?

Asked by: lcjacks
Although not necessary you could install one.
Answered by: rk cjpp
Date published: 2016-08-23

I have bought and installed the taillights and the HW2811 blinker. They work great but my blinkers are very erratic. I have not had any trouble with the blinkers before. I have double checked the wiring and the ground, could it bad blinker? 66 mustang

Asked by: skiraly
Yes it could be a faulty flasher.
Answered by: rk cjpp
Date published: 2016-02-18

I just switched over to the LED tail lights on my 1966 mustang Fastback. Which flasher module do I need? Thanks Jeff

Asked by: Raven1
This one is exactly what you need.
Answered by: CJ Pony Parts
Date published: 2015-07-08

I am looking at the the part number HW2811, which is a LED Flasher for my 1968 Mustang Convertible.  Will this flasher work if there is a mix of incandescent and LED bulbs?  My goal is to replace the tail lights first and slowly buying other LED's I need.

Asked by: stang1968
Yes, it will work fine with a mix of bulbs.
Answered by: CJ Pony Parts
Date published: 2015-06-29

Why won't this work on a 1970 mustang ?

Asked by: js stelj
Wiring differences cause incompatibility.
Answered by: CJ Pony Parts
Date published: 2015-06-01

Can i mix orginal bulbs and leds with this flasher ?

Asked by: Kimpan
You could - you might not install LED taillights at the same time as your parking lots (or vice versa), and since the car only requires one of flasher modules, all bulbs (LED and non-LED) would work fine.
Answered by: CJ Pony Parts
Date published: 2015-05-11
  • 2016-12-09T07:45CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_HW2811, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 108.4ms
  • QUESTIONS, PRODUCT

You Might Also Like