White LED Map Light Conversion Kit for all 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs.
If you're looking for a simple way to make big changes to your interior, look no further. This White LED Map Light Conversion Kit for your 2005-2014 Mustang is the perfect choice to do just that with minimal costs!
The kit includes two bright white LED light bulbs to completely transform the interior appearance of your Mustang. The factory incandescent bulbs used for the map lights sometimes just aren't enough, especially for someone who may be sitting in the back seat. This LED Map Light Conversion Kit will definitely help with visibility from all angles of your interior.
Features and Benefits:
- 5-Chip High Intensity Bulbs
- Uses 1/10th Of The Power Of Stock Incandescent Bulbs
- Power Saving SMD Technology
- Rated at 100,000 Hours Of Continuous Use
- Includes (2) White LED Bulbs
This LED Conversion Kit is an easy way to change the interior appearance of your Mustang, at a great price. These bulbs are bright white in color, and only use 1/10th the power of your stock incandescent bulbs. On top of that, they feature power saving SMD technology which is rated at 100,000 hours of continuous use. The 5-Chip High Intensity Bulbs are specially manufactured to not only last a long time, but light up the interior of your 'Stang much brighter than your stock incandescent bulbs.
So don't hesitate to make a major change for a fraction of the cost and order this White LED Map Light Conversion Kit for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 or 2014 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
Is it normal for these lights to stay dim after vehicle is turned off
Would these fit the license plate lights?
You Might Also Like
CJ's Low Price:$74.99
CJ's Low Price:$64.99
LED bulbs are going to run much brighter and much cooler than the factory bulbs provided in your 2015 Mustang. This style bulb here will fill multiple locations, including the trunk and glove box, with the most popular location being to replace your map lights.
The glove box and trunk are pretty easy to install. A lot of people have asked how to install the actual map lights. The map light's pretty simple as well. First, I'll show you the stock map light. You can see it's very yellowish light, not very bright at all.
To install it, you simply remove this by pulling down on the ends, and if you pull down here and get your finger underneath, there's a clip on each side. Pull it straight down. It'll pop right off, and once you get it on simply pull straight out, pop that out, remove this bulb and replace it with your LED.
If your map light's been on for a while, the factory bulbs can be kind of on the warm side, so make sure you test it before you put your hand on it so you don't burn yourself. You pop that on. Install the LED. Check it before you put it back in the car. Reinstall and you're finished.
If you put the light in and hit the button and it doesn't turn on, all you've got to do is reverse the polarity. Simply pull it out, spin it 180 degrees, and plug it back in.
To give you a comparison, we left the stock light on this side, and there's our LED: much cooler looking light, much brighter, easier to see and again, they run a lot cooler and will last a lot longer than a stock bulb as well.