LED Marker Light Conversion Kit Front/Rear 2005-2014

CJ's Part Number: HW3258
CJ's Low Price:
$74.99
1480636800 52420
Earn 74 RPM Points What's this?
LED Marker Light Conversion Kit Front/Rear 2005-2014
LED Marker Light Conversion Kit Front/Rear 2005-2014 LED Marker Light Conversion Kit Front/Rear 2005-2014 LED Marker Light Conversion Kit Front/Rear 2005-2014 LED Marker Light Conversion Kit Front/Rear 2005-2014

Product Description

Front and Rear LED Marker Light Conversion Kit for all 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs.

The subtle touches are always the ones that count. And the subtle touch of this Front and Rear LED Marker Light Conversion Kit for your 2005-2014 Mustang is most definitely the right choice for your 'Stang.

Kit Includes:
- LED Bulbs (4)
- Detailed Instructions

This kit comes with four bright white LEDs for your driver and passenger side front and rear bumper marker lights. This LED Conversion Kit allows your Mustang to be seen in all conditions compared to the out-dated factory incandescent bulbs.

Features and Benefits:
- 9 Super Bright White LEDs In Each Bulb
- Replaces Factory 168, 194, 158, 2825, 192, and 211-2 Series Bulbs
- Custom Die Cast LED Heat Sink
- Uses 1/10th Of The Power Of Stock Incandescent Bulbs
- Power Saving 5050 SMD Technology
- Rated at 100,000 Hours Of Continuous Use

This LED Conversion Kit is a cost-effective way to change the appearance of your Mustang. These bulbs are super bright white in color, and are rated for over 100,000 hours of continuous use. On top of that, they feature a custom die cast LED heat sink to dissipate the heat from the bulb as quickly as possible. Take the next step in making your Mustang the talk of the town.

Order the Front and Rear LED Marker Light Conversion Kit for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 or 2014 Mustang from CJ Pony Parts today! And improve the overall safety and appearance of your Mustang!

Similar Mustang Parts

similar Mustang parts More Marker Lights  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 136.36ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Is this still availble and it well fit to mustang 2012 base 2 door 3.7L ?? 

Asked by: Fars85
Yes to both questions.
Answered by: CJPP Dave
Date published: 2016-10-12

WILL THESE WORK WITHOUT ADDING A RESISTOR TO STOP ANY ERRORS?

Asked by: gEORGEV
Yes, no resistor is necessary with these.
Answered by: CJPP Dave
Date published: 2016-09-19

I have a 07 Mustang convertable gt/cs. I have bought some led's aftermarket running lights. They are a series 194 and a couple have burn't out or shorted. I would  like  to order a set of four, and if they work good I will be ordering 2 more sets.

Asked by: Mau Mau
These are what you need.
Answered by: CJ Pony Parts
Date published: 2015-09-03

What are the dimensions of these bulbs? length, width, depth, size of the wedge plug? How do these differ from the Back-up Conversion Kit # HW3255? Both kits seem to replace all the same original factory bulbs. 

Asked by: Silver Tiger
They fit into a rubber boot and then into a vertical strand of five on each side by the headlights (about 3/8 inches long)
Answered by: Mau Mau
Date published: 2015-09-02
  • 2016-12-02T08:14CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_HW3258, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 171.75ms
  • QUESTIONS, PRODUCT

You Might Also Like