Driver Side Lower Cowl Repair Panel for all 1965, 1966, 1967 and 1968 Mustangs.
If the driver side lower cowl area in your vintage 1965-1968 Mustang is leaking water when you drive it through rain or wash it, then it's probably time to get a Driver Side Lower Cowl Repair Panel, like this one from CJ Pony Parts! This panel will weld into place after you cut out your old one.
This Driver Side Lower Cowl Repair Panel measures in at 15-1/2" x 18". It's specific to 1965-1966 Mustangs because of the mounting studs for the fresh air vent that will mount below it. The studs will fit the vent on 1965-1966 Mustangs but it won't fit 1967-1968 Mustangs unless you drill additional holes in the vent. You'll install this Driver Side Lower Cowl Repair Panel by first removing the upper cowl panel on the driver side and drilling out the spot welds. Then you'll weld this panel into place after cutting out the old one.
Please Note: If you have a 1967-1968 Mustang and don't wish to drill holes in the vent, please see CJ Pony Parts # COWL3. This is a one-piece lower cowl made for 1967-1968 Mustangs.
CJ Pony Parts is positive that you'll want your Mustang looking its best, so we offer plenty of body and sheet metal parts. CJ's body and sheet metal will allow you to repair damaged parts of your Mustang or style your Mustang to have the perfect look to impress anyone who sees it.
Order a Driver Side Lower Cowl Repair Panel for your 1965, 1966, 1967 or 1968 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
does this cowl vent come with studs to mount the actual drivers side air vent
You mentioned the mounting studs dont match up for a 1968. So do you need to cut off the ones on this one and weld them in different locations? Is there another manufacturer of the part that carries the correct 1968 patch?
is this the cowl for under the dash that connects to the air vent?
Will the cowl patch panel fit (even with some massage) a 1966 Fairlane/Comet? I have a Comet and it need the whole patch for both sides. Also, the air vent for the comet is 6" round. Is this vent the same size?
shipping to netherlands how much is det
You Might Also Like