Stainless Steel Luggage Rack for 1965-1968 Coupe and Convertible Mustangs.If you are having trouble fitting all your luggage inside the car, add a luggage rack to the trunk of your Mustang. With a stainless steel finish, this luggage rack is sure to last as long as your car.
Includes mounting hardware and an installation template specific to 1965-1966 Mustangs.
*Does NOT fit Fastback Mustangs.
Similar Mustang PartsMore Trunk Area
Product ReviewsWrite a review
Luggage Rack Stainless Steel Coupe/Convertible 1965-1968 is rated out of 5 by 1.
Rated 3 out of 5 by Low Crawl from Not up to show standards I received this item last night and immediately knew it was not look right with my restored 66 GT convertible and went to bed upset. This morning I inspected it closer and decided to cleane the stainless steel and after a few hours it appeared to shine like a wanted. I then did further quality control on it. I loosed all the screws holding it together and tightened them up so it was looking much better. Next I checked the plastic black end caps and all were loose and easily pulled out. I got some glue I think is the best, "Goop" and reinstalled them. After waiting 24 hours, this luggage rack was up to par. Be advised, if you want this item, be ready to do what I did and you will be pleased. I became very familiar with the rack and recommend it to a friend.
Date published: 2015-08-22
how do you tighten a nut that is almost unaccessible, it is inside the trunk body.There is a small opening, but I can't tighten the nut.
Try to get an extension in there?
Date published: 2015-09-30
I have a 98 mustang convertible and am trying to find a compatible luggage rack. any suggestions?
Most likely that isn't going to be available. They weren't an option for that generation, nor were they a popular accessory (if they were even available at all).
Date published: 2015-09-08
How much does it weights? Thanks
It ships at 11 pounds, including packaging.
Date published: 2015-08-19
Do you think this might fit on a '96 Cougar?
Most likely not.
Date published: 2015-08-05
Is the mounting hardware including the rubber mounts and spacers available to be purchased separately?
No, unfortunately, it's not available separately.
Date published: 2015-07-28
can you tell me the dimensions?
Date published: 2015-07-27
will the luggage rack fit a 1973 mustang?
No it only fits 1965-1968 Mustangs.
Date published: 2015-06-29
what are the dimensions?
Date published: 2015-03-27
You Might Also Like
CJ's Low Price:$78.99
By Bill Tumas: We're here with a trunk mounted luggage rack for your '64 through '68 coupe or convertible. The luggage rack was a dealer installed accessory back in the '60s. It's still popular today with many of our stores. Our kit includes the luggage rack, installation hardware, as well as instructions. The instructions also double as a template. Now the template is only going to be for the '64 through '66 cars. If you're installing this on a '67 through '68, you'll have to measure and center the rack. The luggage rack is going to install using basic hand tools, and is going to add a unique rare option to your '65 through '68 Mustang.