March Performance Serpentine Pulley And Bracket Conversion Kit Ultra Style Black 4-Bolt Damper 351W With Power Steering And Air Conditioning 1965-1969

March Performance: 30376-08
CJ's Low Price:
$892.99
1481155200 59051
Pick up a new set of valve covers in addition to your March Performance kit!
CJ's Low Price:
$240.99
Qty
Earn 892 RPM Points What's this?
March Performance Serpentine Pulley And Bracket Conversion Kit Ultra Style Black 4-Bolt Damper 351W With Power Steering And Air Conditioning 1965-1969
March Performance

Product Description

March Performance Black Ultra Style Serpentine Pulley and Bracket Conversion Kit for 1965, 1966, 1967, 1968 and 1969 Mustangs with a 351W V8 Engine with a 4-Bolt Crankshaft Damper, Power Steering and Air Conditioning.

Looking for a little more than a run of the mill stock replacement pulley kit for your Mustang? March Performance has your answer! They just released their brand new Black Ultra Style Serpentine Pulley and Bracket Conversion Kit for your 1965-1969 Mustang with a 351W V8 Engine with a 4-Bolt Crankshaft Damper, Power Steering and Air Conditioning.

This kit fits 1969 and newer 4-Bolt Damper 351 Windsor engines that have been swapped into a 1965-1969 Mustang due to the lower radiator hose water pump location on the passenger side.

March Performance Kit Includes:
- Alternator Bracket
- Tensioners & Hardware
- Crankshaft Pulley
- Water Pump Pulley with Nose Cover
- Alternator Fan & Pulley with Nose Cover
- Power Steering Bracket and Pulley
- A/C Bracket
- A/C Idler Pulley
- A/C Pulley with Nose Cover
- Maintenance-Free Black Powder Coating

Designed to be Used with Original Style Parts Including:
- Water Pump with Passenger Side Outlet
- 4-Bolt Crankshaft Damper
- Early Ford Power Steering Pump

This Serpentine Pulley & Bracket Kit from March Performance is precision CNC machine-made to fit perfectly under your Pony’s hood, while managing both high torque and vibration. After purchasing this kit, you'll acquire a one-piece alternator bracket that not only provides stringent support, but also looks good doing it.

The alternator fan & pulley included come with a nose cover to make sure everything runs smoothly. The larger diameter crank pulley in this kit will aid in driving your alternator, air conditioning and water pump at idle where it truly counts. The water pump pulley also comes with a nose cover to hook up to the water pump on the lower passenger side. The finished street rod ratio increases water flow & fan speed, helping with low-speed driving.

A power steering bracket and pulley is included, hooking up to an early Ford Power Steering Pump, and should make for a significant improvement. March Performance’s kit also includes parts for your air conditioning hookup, with an A/C bracket, a pulley with nose cover and an idler pulley that will drastically increase your air conditioning’s overall effectiveness. This kit also includes stainless steel tensioning rods and moly rod ends for the best in high performance operation.

Required Belt Sizes:
- Alternator: 40 Inches
- Power Steering/Air Conditioning: 53.8 Inches

To give it more style, March Performance puts black powder coating on this kit. In turn, eliminating the need to polish anything, which is less hassle for you! Through the high tensile strength of this upgrade, you'll have much longer wear, and March Performance goes as far as putting on a hard coating on those high wear areas of the pulleys.

You'll also receive all of the mounting hardware that you will need, along with thorough instructions so you can install this yourself, and do it correctly.

Please Note: The power steering bracket kit is designed for use with an electric fuel pump. The provided bracket locates the power steering pump to where there is not enough clearance for the mechanical fuel pump. If you have an aftermarket damper, a crank pulley spacer may be required.

* This kit will NOT work on Mustangs without Power Steering or Mustangs without Air Conditioning.
* Water Pump is located on Passenger Side.  

March Performance has been an industry leader in both style & performance, and has been serving the Mustang community with expertly crafted engine pulleys & brackets for over 25 years. All of March Performance's pulley and bracket equipment is crafted with a unique mixture of durability, style and performance, providing customers with all of the best aspects of aftermarket Mustang equipment. Look through CJ Pony Parts' inventory of March Performance products to increase the style and performance of the underside of your hood.

Purchase March Performance’s Black Ultra Style Serpentine Pulley and Bracket Conversion Kit for your 1965, 1966, 1967, 1968 or 1969 Mustang with a 351W V8 Engine with a 4-Bolt Crankshaft Damper, Power Steering and Air Conditioning from CJ Pony Parts today!

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 92.93ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 100.94ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like