March Performance Black Ultra Style Serpentine Pulley and Bracket Conversion Kit for all 1969-1/2, 1970, 1971, 1972 and 1973 289 and 302 V8 Mustangs with a 4-Bolt Crankshaft Damper, Power Steering and Air Conditioning.
Are you looking to upgrade the engine bay of your 1969-1/2-1973 Mustang with a 4-Bolt Crankshaft Damper, Power Steering and Air Conditioning? Looking to improve the overall performance from your classic Pony's 289 or 302 V8 Engine? Then check out this all-new Black Ultra Style Serpentine Pulley and Bracket Conversion Kit from March Performance! This kit will give you everything you'll need to get that upgrade, and be able to install it yourself properly.
- Alternator Bracket
- Tensioners & Hardware
- Crankshaft Pulley
- Water Pump Pulley with Nose Cover
- Alternator Fan & Pulley with Nose Cover
- Power Steering Bracket and Pulley
- A/C Bracket
- A/C Idler Pulley
- A/C Pulley with Nose Cover
- Maintenance-Free Black Powder Coating
Designed to be Used with Original Style Parts Including:
- 4-Bolt Crankshaft Damper
- Water Pump with Driver Side Outlet
- Early Ford Power Steering Pump
March Performance's Serpentine Pulley & Bracket Kit is precision CNC machine-made to fit flawlessly under your Mustang's hood, handling high torque & vibration. In this kit, you'll receive a one-piece alternator bracket that is styled & supportive while the alternator fan & pulley comes with a nose cover to make sure it runs clean & smooth. The larger diameter crank pulley in this kit will aid in driving your alternator, A/C and water pump at idle where it truly counts. The water pump pulley comes with a nose cover and hooks up to the water pump on the lower driver side. The finished street rod ratio increases water flow & fan speed, helping at critical low-speed driving. This kit comes with stainless steel tensioning rods and moly rod ends for high performance operation.
A power steering bracket and pulley is included, hooking up to an early Ford Power Steering Pump, and should make for a significant improvement. This kit from March Performance also includes parts for your A/C hookup, with an A/C bracket, a pulley with a nose cover and an idler pulley that will increase your air conditioning's effectiveness.
A black powder coating is put on to give it a little more style, and also to eliminate the need to polish everywhere, not just those hard to reach places. The high tensile strength of this upgrade makes for much longer wear and March Performance goes as far as putting a hard coating on the high wear areas of the pulleys. These kits also include all of the mounting hardware you'll need, as well as detailed instructions so you can easily do the installation yourself and get it done right.
Required Belt Sizes:
- Alternator: 39 Inches
- Power Steering/Air Conditioning: 52 Inches
Please Note: The power steering bracket kit is designed for use with an electric fuel pump. The provided bracket locates the power steering pump to where there is not enough clearance for the mechanical fuel pump. If you have an aftermarket damper, a crank pulley spacer may be required.
This kit will NOT work on Mustangs without Power Steering or Mustangs without Air Conditioning.
March Performance has been an industry leader in both style & performance, and has been serving the Mustang community with expertly crafted engine pulleys & brackets for over 25 years. All of March Performance's pulley and bracket equipment is crafted with a unique mixture of durability, style and performance, providing customers with all of the best aspects of aftermarket Mustang equipment. Look through CJ Pony Parts' inventory of March Performance products to increase the style and performance of the underside of your hood.
Don't delay. Order March Performance's Black Ultra Style Serpentine Pulley and Bracket Conversion Kit for your 1969-1/2, 1970, 1971, 1972 or 1973 289 or 302 V8 Mustang with a 4-Bolt Crankshaft Damper, Power Steering and Air Conditioning from CJ Pony Parts today!
Similar Mustang PartsMore Restomod Engine
Product ReviewsWrite a review
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$822.99
March Performance Serpentine Pulley And Bracket Conversion Kit Ultra Style Black Without Power Steering And Air Conditioning 4-Bolt Damper 289/302 1969-1/2-1973/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$454.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$454.99
March Performance Serpentine Pulley And Bracket Conversion Kit Ultra Style Black With Power Steering Without Air Conditioning 4-Bolt Damper 289/302 1969-1/2-1973/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$648.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$648.99