March Performance Black Ultra Style Serpentine Pulley and Bracket Conversion Kit for all 1969-1/2, 1970, 1971, 1972 and 1973 351W V8 Mustangs with a 4-Bolt Crankshaft Damper, Power Steering and Air Conditioning.
Add an aggressive touch under your hood with this Black Ultra Style serpentine Pulley and Bracket Conversion Kit from March Performance. Fitting all 1969-1/2-1973 351W V8 Mustangs with a 4-Bolt Crankshaft Damper, Power Steering and Air Conditioning, this kit will provide you everything you need to give your classic Pony an upgrade in style and performance.
- Alternator Bracket
- Alternator Fan & Pulley with Nose Cover
- Tensioners & Hardware
- Crankshaft Pulley
- Water Pump Pulley with Nose Cover
- Power Steering Bracket and Pulley
- A/C Bracket
- A/C Idler Pulley
- A/C Pulley with Nose Cover
- Maintenance-Free Black Powder Coating
Designed to be Used with Original Style Parts Including:
- Water Pump with Driver Side Outlet
- 4-Bolt Crankshaft Damper
- Early Ford Power Steering Pump
This Serpentine Pulley & Bracket Kit from March Performance is precision CNC machine-made to fit perfectly under your Mustang's hood, managing high torque & vibration. When you purchase this kit, you'll acquire a one-piece alternator bracket that is styled and provides stringent support. The alternator fan & pulley in this kit comes with a nose cover and helps make sure everything runs clean & smooth. The larger diameter crank pulley in this kit will aid in driving your alternator, A/C and water pump at idle where it truly counts. A water pump pulley comes with a nose cover and hooks up to the water pump on the lower driver side.
A power steering bracket and pulley is included, hooking up to an early Ford Power Steering Pump, and should make for a significant improvement. This kit from March Performance also includes parts for your A/C hookup, with an A/C bracket, a pulley with a nose cover and an idler pulley that will increase your air conditioning's effectiveness. This kit comes with stainless steel tensioning rods and moly rod ends for high performance operation. The finished street rod ratio increases water flow & fan speed, helping at critical low-speed driving.
March Performance puts on a black powder coating on this kit, to give it a little more style, while also conveniently eliminating any obligation to polish everything. Through the high tensile strength of this upgrade, you'll have much longer wear, and March Performance goes as far as putting on a hard coating on those high wear areas of the pulleys. You'll also receive all of the mounting hardware that you will need, along with thorough instructions so you can install this yourself, and do it correctly.
Required Belt Sizes:
- Alternator: 41.5 Inches
- Power Steering/Air Conditioning: 53.8 Inches
Please Note: The power steering bracket kit is designed for use with an electric fuel pump. The provided bracket locates the power steering pump to where there is not enough clearance for the mechanical fuel pump. If you have an aftermarket damper, a crank pulley spacer may be required.
This kit will NOT work on Mustangs without Power Steering or Mustangs without Air Conditioning.
March Performance has been an industry leader in both style & performance, and has been serving the Mustang community with expertly crafted engine pulleys & brackets for over 25 years. All of March Performance's pulley and bracket equipment is crafted with a unique mixture of durability, style and performance, providing customers with all of the best aspects of aftermarket Mustang equipment. Look through CJ Pony Parts' inventory of March Performance products to increase the style and performance of the underside of your hood.
Purchase March Performance's Black Ultra Style Serpentine Pulley and Bracket Conversion Kit for your 1969-1/2, 1970, 1971, 1972 or 1973 351W V8 Mustang with a 4-Bolt Crankshaft Damper, Power Steering and Air Conditioning from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$892.99
CJ's Low Price:$670.99