March Pulley Kit 351 Windsor For Use With Power Steering 1965-1969

March Performance: 30365
CJ's Low Price:
$741.99
1490227200 27703
Earn 741 RPM Points What's this?
March Pulley Kit 351 Windsor For Use With Power Steering 1965-1969
March Performance

Product Description

March Performance bracket and serpentine pulley kit for 1969 Mustangs with a 351 Windsor engine and power steering. Also fits 1965-1969 Mustangs that have been swapped to a 3-bolt damper 351 Windsor engine.

Includes:
-Alternator Bracket
-Tensioners and hardware
-Crankshaft Pulley
-Water Pump Pulley with nose cover
-Alternator Fan & Pulley with nose cover
-Power Steering Bracket and Pulley

Designed to be used with original style parts including:
-3 bolt crankshaft damper
-Water pump with passenger side outlet
-Early Ford power steering pump

Please Note:
The power steering bracket kit is designed for use with an electric fuel pump. The provided bracket locates the power steering pump to where there is not enough clearance for the mechanical fuel pump.
 

Installation Instructions

Mustang Installation

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 8.12ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

How much for the crate 351 windsor engine complete and what sort of horse power does it put out. Thanks Darko 

Asked by: Perfect weapon
The product you have chosen is a March pulley kit. The engine is for picture purposes only.
Answered by: rk cjpp
Date published: 2017-03-13

Will it fit in a 96 mustang gt

Asked by: MIKE18812113
No
Answered by: Flea69
Date published: 2017-02-26

Do You have any of these parts for a Y block 272 engine. 12 volt starter, alternator that would work for it , carberator as I have a 56 4 barrel manifold, and an air cleaner. The engine is rebuilt so the inside is good.

Asked by: Portland Jimmy
No we do not.
Answered by: rk cjpp
Date published: 2017-02-05

Do you have a kit for a 289/302? No A/C, with P/S.

Asked by: Dufferp_3
We offer this kit, http://www.cjponyparts.com/march-pulley-kit-for-use-with-power-steering-and-without-a-c-289-302-1965-1969/p/PK02/
Answered by: rk cjpp
Date published: 2017-01-28

Will it fet on a 69 ford pickup

Asked by: Hayes
If the engine is a 351 Windsor it will.
Answered by: rk cjpp
Date published: 2017-01-06

I need a full gaskets set to overhaul my 1968 mustang 6-cylynders 200-cid engine, do you have in stock ?

Asked by: tong
Here is the link to the gasket set we offer for the 200 6 cylinder, http://www.cjponyparts.com/felpro-170-200-inline-6-engine-gasket-kit-1964-1973/p/EGK6/
Answered by: rk cjpp
Date published: 2016-10-19

Will This fit a2008 mustang pony 

Asked by: Taz D
No it will not.
Answered by: rk cjpp
Date published: 2016-10-11

what are the specs on this engine. im looking for an engine like this to put in my 1990 mustang to start racing. is there anyway that you all have a deal on just the short block for this motor? I have heads and intake will change cam and cam gears.

Asked by: winters28
I would start here to find what you're looking for: http://www.cjponyparts.com/mustang-crate-engines-cylinder-blocks/c/60060250/
Answered by: CJPP Staff
Date published: 2017-01-27
  • y_2017, m_3, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_PK11, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 9.19ms
  • QUESTIONS, PRODUCT

You Might Also Like