AMK Products Master Body Kit 1968

AMK Products: 68Z-M
CJ's Low Price:
$221.99
In Stock
Free Same Day Shipping
Orders placed by 5:00PM Eastern time ship today1406160000
Earn 221 RPM Points What's this?
MBK4

Product Description

AMK Products Master Body Kit for 1968 Mustangs.

This Master Body Kit from AMK Products includes 352 total pieces of factory correct, OE style fasteners that are required to properly reassemble your 1968 Mustang's sheet metal in one convenient kit! This kit is specifically assembled for all 1968 Mustangs, except 1968 Shelby Cobras.

AMK Products' Master Body Kit includes individually packaged sets of hardware for various applications on your 1968 Mustang. Each package is thoroughly labeled so you know exactly where it goes on your Mustang. The individual sets of hardware also include the total number of pieces that are required for the specific application. The main finish for all hardware in this kit is silver cadmium, which is factory correct. Some other finishes are included where necessary.

Master Body Kit Includes:
- Battery Tray: Hex Screw/Conical Spring Washer Assembly, U-Nuts (6)
- Rear Bumper Guard Mounting Brackets: Hex Screw/Conical Spring Washer Assembly, Shims, U-Nuts, Sealer (8)
- Rear Bumper Guard Pads: Stamped Nuts (6)
- Front Bumper Guards: Hex Screw/Conical Spring Washer Assembly, Padded U-Nuts, J-Nuts (8)
- Rear Bumper Guards: Hex Screw/Conical Spring Washer Assembly, Phillips Pan Head Screw/External Tooth Washer Assembly, Padded U-Nuts (8)
- Cowl Braces to Cowl: Hex Flange Screw/Conical Spring Washer Bolt Assembly, Flange Nuts (8)
- Exterior Door Handles: Phillips Pan Head Screw/External Tooth Washer Assembly, External Nut/Washer Assembly (4)
- Door Hinges: Original Hex Washer Head Screws (24)
- Door Latch Strikers: Phillips Flat Head Screws (4)
- Door Latches to Door Shell: Phillips Flat Head Screw/External Tooth Washer Assembly (6)
- Fender to Pillar Brackets: Hex Screw/Conical Spring Washer Assembly (2)
- Fender Extensions: Studs and Serrated Flange Nuts (12)
- Rear Fender Splash Shield Brackets: Hex Screw/Conical Spring Washer Assembly, J-Nuts (4)
- Front Fender Splash Shield Seals: Nylon Retainers (10)
- Fender Splash Shields: Hex Washer Head Sheet Metal Screws (14)
- Fenders: Hex Screw/Conical Spring Washer Assembly, J-Nuts, Cage Nuts, Washers (48)
- Floorboard Hole Covers: Hex Washer Head Sheet Metal Screws (8)
- Grille: Hex Screw/Conical Spring Washer Assembly, Hex Washer Head Screws, Nuts (10)
- Grille Supports: Hex Screw/Conical Spring Washer Assembly, J-Nuts (12)
- Headlight Doors: Stainless Steel/Chrome Phillips Oval Head Screws, Nylon Nuts (12)
- Hood and Hinges: Hex Screw/Conical Spring Washer Assembly, J-Nuts (14)
- Adjustable Hood Bumpers: U-Nuts, Jam Nuts (4)
- Hood Latch and Catch: Hex Screw/Conical Spring Washer Assembly, J-Nuts (5)
- Hood Latch Support: Hex Screw/Conical Spring Washer Assembly (3)
- Single Exterior Door Mirror: Stainless Steel/Chrome Phillips Oval Head Screw, Rivet Nuts (4)
- Quarter Panel Extensions: Studs, Nut/Conical Spring Washer Assembly, Flat Washers (26)
- Shock Tower Braces: Hex Screw/Conical Spring Washer Assembly, Flange Nuts (24)
- Stone Deflector: Hex Screw/Conical Spring Washer Assembly, Stud Bolts, Special Nuts (10)
- Trunk Latch and Striker: Hex Screw/Conical Washer Assembly (5)
- Trunk Lid and Hinges: Hex Screw/Conical Spring Washer Assembly, J-Nuts (12)
- Front Valance: Hex Screw/Conical Spring Washer Assembly, Hex Screw/Conical Washer Assembly, J-Nuts (16)
- Rear Valance: Clipped Head Bolts, Phillips Pan Head Screws, Nuts (15)

Buying individual sets of hardware for your 1968 Mustang can be expensive and time consuming if you're not sure which hardware you need. This Master Body Kit makes it easy by including, roughly, 85% of the original, factory correct hardware that specifically fits your 1968 Mustang. With a Master Body Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1968 Mustang is going to be restored with the finest factory correct hardware on the market.

AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!

*Not for use on 1968 Shelby Cobras. A specific kit for all 1968 Shelby Cobras is available (MBK4S).

Similar Mustang Parts

similar mustang parts More Mustang Hardware  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review