Master Power 11" Two Piston Power Disc Brake Conversion Kit with Spindles for 1965-1966 V8 Manual Transmission Mustangs.Add some late model function to your early model Mustang with this two-piston disc brake conversion kit from Master Power. Includes everything necessary to convert to front disc brakes and power brakes.
This kit requires the use of minimum 15" wheels, however not all 15" wheels will fit. The calipers used in this kit are much larger than the original style calipers and will require more caliper to wheel-face / spoke clearance.
Conversion Kit Includes:
- Late model 2 piston calipers with 11" slotted rotors
- Fully assembled on spindles ready to install
- New bearings and seals installed along with new dust caps
- Brake Booster with dual bowl master cylinder
- New soft brakes hoses
- Adjustable proportioning valve
*Will not work with Styled Steel or Magnum 500 wheels.
Product ReviewsWrite a review
I asked a question recently about 15" cragar rims fitting a master power 11" front disc brake system. The db1520 ps. I haven't received an answer yet. I'm very interested in the conversion if the cragars will work. Thanks for your cooperation.
I have a 1964 1/2 mustang converted from 6 cyl to 5.0 V8 motor. I want to put a master power db 1520 disk brake conversion. Will the pitman arm and the idler arm and tie rod ends have to be replaced also?
You Might Also Like
CJ's Low Price:$1,158.99
From:CJ's Low Price:$628.99