Maximum Motorsports Roll Bar Drag Race 6-Point With Standard Door Bars/Fixed Harness Mount Convertible 1994-2004

Maximum Motorsports: MMRB-14
MSRP: $584.00
CJ's Low Price:
$554.99
Ships from Manufacturer Item will ship directly from the manufacturer1406246400
Earn 554 RPM Points What's this?
ROLL014

Product Description

Maximum Motorsports 6-Point Drag Race Roll Bar with Standard Door Bars and a Fixed Harness Mount for all 1994-2004 Mustang Convertibles.

Increase both safety and the rigidity of your Mustang's chassis with a Maximum Motorsports Drag Race Roll Bar. This Drag Race roll bar includes standard style door bars to increase side impact safety. Standard door bars are designed for easy initial installation (no welding), but are not intended to be removed.

Maximum Motorsports manufactures all their Roll Bars from the highest quality materials and hardware. Made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing). Contour-hugging 6" x 6" mounting pads with backup plates sandwich the unibody for safe and strong mounting. All hardware is Grade 5 or higher. Maximum Motorsports roll bars are designed to fit with your stock Mustang interior.

Maximum Motorsports includes reinforcement plates for the convertible chassis. These reinforcements are welded into place behind the rear seat to provide a good structural attachment point for the rear braces. During installation the convertible top can be lowered and stowed, which provides very easy access to protect the interior and complete the required welding. The roll bar bolts into its final position, and can be removed from the car as a complete unit. Although the roll bar does not weld to the chassis you will need to weld the rear supports to the main hoop.

All of Maximum Motorsports roll bars are uncoated, bare steel. For a high quality finish, the installer should paint or powder coat the roll bar as part of the installation. Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.

Please Note: The Maximum Motorsports Roll Bar for Mustang convertibles does require welding to the floor pan. Someone who is a qualified "expert welder" is required for installation of a convertible roll bar.

*Drag Race roll bars conform to NHRA and NMRA rules.
*Roll bars in convertibles will not accommodate a light bar.
*Convertible tonneau covers will not fit after a roll bar installation.

Product Reviews

Write a Review