Maximum Motorsports 6-Point Drag Race Roll Bar with Standard Door Bars and a Fixed Harness Mount for all 1994-2004 Mustang Coupes.Increase both safety and the rigidity of your Mustang's chassis with a Maximum Motorsports Drag Race Roll Bar. This Drag Race roll bar includes standard style door bars to increase side impact safety. Standard door bars are designed for easy initial installation (no welding), but are not intended to be removed. A fixed harness mount tube provides a safe attachment point for 5-point harness shoulder belts.
Maximum Motorsports manufactures all their Roll Bars from the highest quality materials and hardware. Made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing). Contour-hugging 6" x 6" mounting pads with backup plates sandwich the unibody for safe and strong mounting. All hardware is Grade 5 or higher. Maximum Motorsports roll bars are designed to fit with your stock Mustang interior.
The Maximum Motorsports Roll Bars for Mustang coupes are designed to bolt to the chassis, without welding. The floor pan is sandwiched between the roll bar mounting pads and the back-up plates underneath the floor pan. There is a significant clamping force between the two pads, providing a very secure method of attachment. Although the roll bar does not weld to the chassis you will need to weld the rear supports to the main hoop.
All of Maximum Motorsports roll bars are uncoated, bare steel. For a high quality finish, the installer should paint or powder coat the roll bar as part of the installation. Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.
*Drag Race roll bars conform to NHRA and NMRA rules.
Similar Mustang PartsMore Mustang Roll Bars
You Might Also Like
Regular Price: $166.99
Special Price: $150.29