MBRP XP Series 3" to Dual 2-1/2" Split Rear Exit Cat-Back Exhaust System with 3-1/2" Tips for all 2015-2016 F150s with a 2.7L or 3.5L EcoBoost Engine.
Want the perfect exhaust note accompanied by sheer reliability and all-out performance? Look no further than MBRP for your exhaust needs when it comes to your 2015-2016 2.7L or 3.5L EcoBoost F150! This MBRP XP Series 3" to Dual 2-1/2" Split Rear Exit Cat-Back Exhaust System with 3-1/2" Tips couldn’t be a better choice for your F150.
This Exhaust system (S5255409) is made with beautiful T409 stainless steel and has a diameter of 3” from the cats to the muffler and is 2-1/2” in diameter from the muffler to the dual 3-1/2” mirror polished stainless steel tips. The tips on this particular system exit on either side under the rear bumper.
Features and Benefits:
- XP Series Made of Beautiful T409 Stainless Steel
- Dual Rear Exit Under Rear Bumper
- 3” Diameter Exhaust Tubing Between Catalytic Converters and Muffler
- 2-1/2” Diameter Exhaust Tubing Between Muffler and Exhaust Tips
- Dual 3-1/2” Mirror Polished Stainless Steel Exhaust Tips
- Increase in Both Horsepower and Torque
- Bullet Style Muffler for Deep Sound
- Over 70% Increased Exhaust Flow
- Fits all Cab and Bed Configurations
- All Necessary Hardware And Installation Instructions Included
This exhaust system (S5255409) is made from T409 Stainless Steel, so you can sleep soundly at night knowing that with a seamless construction, this exhaust system will last you a long, long time. MBRP develops these exhaust systems with as little seams as possible in an effort to minimize any risk of rust.
MBRP puts hours upon hours of research and development into making sure each and every exhaust system is thoroughly tested to make sure it’s a perfect fit for your 2015-2016 F150 in every way. Tested everywhere from the street to the dyno, this cat-back system is sure to take your F150 to the next level!
Please Note: Extension pipe will need to be cut, or not be needed at all for some cab and bed configurations. Shortening of the front pipe will be required to fit smaller wheel wheelbase configurations. Please refer to installation instructions.
The stock F150 cat-back sees 477 CFM but MBRP's cat-back flows 877 CFM. With an exhaust flow increase of over 70%, you can expect great gains in both horsepower and torque. Installation of the MBRP Dual Rear Exit Cat-Back Exhaust System is relatively easy, needing only a few hand tools to complete.
The EcoBoost engines available on the 2015-2016 F150 make minimal noise from the factory. If you want to hear the turbo(s) better, then picking up this MBRP Cat-Back Exhaust System is the perfect choice. These systems pump up the decibels without making your ears ring. The exhaust notes are subtle and manageable when cruising down the highway but will roar when you mash on the throttle. Given all the pros of this system from MBRP, how do you say no to installing this system on your F150?!
So what are you waiting for? Order a MBRP XP Series 3" to Dual 2-1/2" Split Rear Exit Cat-Back Exhaust System with 3-1/2" Tips for your 2015-2016 F150 with a 2.7L or 3.5L EcoBoost Engine from CJ Pony Parts today!
Similar F-150 PartsMore Cat Back Exhausts
This product will fit the following Ford F-150 years:
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$280.00
CJ's Low Price:$109.00