MBRP Cat-Back Exhaust System Dual Rear Side Exit Installer Series 3" To 2.5" With 4" Tips Toyota Tacoma 3.5L 2016

MBRP: S5340AL
MSRP: $494.11
CJ's Low Price:
$399.99
1480982400 66830
Earn 399 RPM Points What's this?
MBRP Cat-Back Exhaust System Dual Rear Side Exit Installer Series 3" To 2.5" With 4" Tips Toyota Tacoma 3.5L 2016
MBRP Cat-Back Exhaust System Dual Rear Side Exit Installer Series 3" To 2.5" With 4" Tips Toyota Tacoma 3.5L 2016 Play MBRP Cat-Back Exhaust System Dual Rear Side Exit Installer Series 3" To 2.5" With 4" Tips Toyota Tacoma 3.5L 2016 Video 1
MBRP

Product Description

MBRP Dual Rear Side Exit 3" to 2.5" Installer Series Cat-Back Exhaust System with 4" Tips for all 2016 Toyota Tacomas with a 3.5L Engine.

Give your 2016 Toyota Tacoma the attention it deserves with this fabulous MBRP (S5340AL) Installer Series Cat-Back Exhaust System. The exhaust products MBRP produces always return a very high rate of performance and efficiency. This system is no exception!

Features and Benefits:
- Heavy Duty Aluminized Steel Construction
- T-304 Stainless Steel 4" Tips
- Fully Sealed Tubing
- 3” to Dual 2.5” Mandrel Bent Tubing
- Easy Bolt-On Installation
- Includes All Necessary Hardware
- Improves Performance and Efficiency
- Fits All Cab and Bed Configurations

After installation of this cat-back exhaust system, you can expect to gain about five horsepower and about five ft. lbs. of torque. You can also expect about a 54% increased flow which will improve the efficiency of your Toyota Tacoma. Installation of this exhaust system will be easy, as it bolts-on and doesn’t require any cutting or welding. All needed components and hardware are included to complete this installation as well.

Please Note: The front pipe for this exhaust comes at a 30-3/8" length for Tacomas with a 140.6" wheelbase. Cutting of the front pipe will be required for the shorter 127.4" wheelbase Tacomas. Please refer to installation instructions.

Constructed from heavy duty aluminized steel, MBRP Installer Series performance exhaust systems offer a reasonable price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems, MBRP's fully sealed tubing adds years to this system.

*You can still retain your factory spare tire after installing this MBRP Cat-Back Exhaust System.

MBRP’s performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your truck will use less gas, last longer and perform better. Every system MBRP sells has been built to the most exacting standards in the industry and every system has been specifically tuned to get the optimal sound from your pickup.

Order an (S5340AL) MBRP Dual Rear Side Exit 3" to 2.5" Installer Series Cat-Back Exhaust System with 4" Tips for your 2016 Toyota Tacoma with a 3.5L Engine from CJ Pony Parts today!

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 104.31ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 112.05ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like

Product Video

MBRP Cat-Back Exhaust System Dual Rear Side Exit Installer Series 3" To 2.5" With 4" Tips Toyota Tacoma 3.5L 2016 Video Transcript
By Bill Tumas: We’re here with an MBRP cat-back exhaust fitting your 2016 3.5L V6 Tacoma. Everyone wants their truck to look, perform, and sound great, and this MBRP cat-back exhaust will do just that. This exhaust is made of three inch mandrel bent aluminized tubing to a straight through muffler with dual two and a half inch tail pipes and four inch angle cut polished stainless steel tips. This easy bolt on exhaust can be found along with other parts for your Tacoma at CJPonyParts.com.