Set of MGP Caliper Covers with ST Logos without Simulated Bolts for all 2013, 2014, 2015, 2016 and 2017 Focus STs.
These MGP caliper covers are TIG welded and formed hydraulically from high-quality 6061-T6 aerospace grade premium aluminum. These are seriously durable caliper covers that feature an attractive powder coated finish and high-speed engraved ST logos on both the front and rear caliper covers. This set of MGP Caliper Covers for all 2013-2017 Focus STs comes with MGP’s innovative clip fastening system and these covers don’t have the simulated bolts etched on them. This is a simple and affordable way to bolt on some authentic style and radically improve wheel appearance.
Features and Benefits:
- Simple 10-minute installation with a patented fastening system
- Reduces caliper heat and brake fade
- Large caliper cover design helps reduce brake dust
- Cheaper alternative to aftermarket brake kits
- Big brake look drastically enhances wheel appearance
- No permanent modifications for easy removal when necessary
This set of MGP Caliper Covers without Simulated Bolts for all 2013-2017 Focus STs are designed to hide your stock brake calipers and provide a much cleaner look than using cheap caliper paint. MGP created their 4-piece set of caliper covers to give your Focus ST that big brake look without breaking the bank on aftermarket brake calipers but still lowers caliper heat, provides effective protection from brake fade and helps reduce brake dust. This custom brake caliper cover set is available in Black with a Red ST logo, Matte Black with a Red ST logo, Red with a Black ST logo and Yellow with a Red ST logo.
- Fastening Clips for Installation
- Driver Side Front Caliper Cover
- Passenger Side Front Caliper Cover
- Driver Side Rear Caliper Cover
- Passenger Side Rear Caliper Cover
With MGP's innovative fastening system, installation is very easy and when you want to remove the caliper covers for cleaning, they slip off rather easily! With these clips the covers don’t require any tape, glue, paint or special tools. Simply attach the covers to your 2013-2017 Focus ST's factory calipers and your ready to go!
Since its launch in 2013, the aftermarket for the Ford Focus ST hatchback has grown considerably and we have added dozens of these parts to our inventory here at CJ Pony Parts, providing you tons of options to upgrade, stylize and boost performance.
Order your 2013, 2014, 2015, 2016 or 2017 Focus ST a set of MGP Brake Caliper Covers from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
/** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$199.00
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$500.00
Turbosmart Blow Off Valve Kompact Shortie Dual Port Focus ST 2013-2017/EcoBoost 3.5L F-150 2011-2012/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$170.99
These MGP caliper covers are going to give our Focus ST that big caliper look without the big caliper cost. It comes with a set of four with the engraved rivets as well as the engraved ST logo, available in your choice of red, black or satin finish.
We’ll start the installation by removing the wheels. The caliper covers come with all necessary mounting hardware. They’re pretty easy to install, too. Basically what you do is you just sit it over your factory caliper and you get it centered, and they provide these clips. Clip those under the caliper, between the caliper and the rotor. Just slide that into place onto the stud. We’ll do the same thing on the bottom and tighten them down. Make sure they’re both tight up onto the studs. Make sure you don’t over tighten these. Just get them as snug as you can and pull the stud out.
Now we want to repeat the process on the passenger’s side and then move onto the rear. The rear hardware fits a little bit different. You want to start by removing the nut and washer from the supplied bracket, and the bracket’s going to clip onto the caliper right here. It’s the same thing with the bottom. Slide the new caliper cover on and reinstall the hardware. And again, repeat the process on the other side.
Included with all the MGP caliper covers is a piece of paper. It looks like it’s scrap paper but what it’s actually designed to is to work as a feeler gauge just to make sure that the brackets installed on the calipers aren’t going to touch the rotors. You’ll want to check all four before you put the wheels back on. Make sure it slides in through without touching. They’re good, we’ll check the fronts. We’ll do the same check with the front. Do it there, also good there.
We’ll reinstall the wheels and your installation is finished. Our MGP caliper covers give our Focus that big break look without the big brake price tag. Besides getting the car off the ground and getting the wheels off, the only tool needed for installation is going to be a 3/8 ratchet. Install should only take you around an hour and you should be back on the road in no time.