Mishimoto Black Oil Cooler Kit with a Thermostatic Oil Sandwich Plate for all 2015, 2016 and 2017 EcoBoost Mustangs.
With the powerhouse under the hood of the new S550 EcoBoost, it’s important that you make sure your engine stays cool under all operating conditions. The turbocharged 2.3L four-cylinder can create a lot of heat, and if driven hard it can cause the oil to overheat easily without an oil cooler. The 5.0L Coyote engine comes with an oil cooler from the factory, however, the EcoBoost does not. Mishimoto took this issue into their own hands with their new Black Oil Cooler Kit with a Thermostatic Oil Sandwich Plate made for your 2015-2017 EcoBoost Mustang!
This particular kit comes in a stealthy black finish and includes a Thermostatic Oil Sandwich Plate that prevents oil flow to the cooler until the engine reaches operating temperature. This allows your engine to warm up quicker and provides oil system protection in cooler climates.
Features and Benefits:
- Stealth Black Finish
- Included Thermostatic Oil Sandwich Plate for Added Oil System Protection
- Durable Braided Stainless Steel Lines
- 19-Row Stacked-Plate Oil Cooler for Optimum Reduction in Oil Temperature
- Minimal Pressure Drop
- Reduces Oil Temperatures By Up To 40F Degrees
- Increases Oil Capacity by 0.75 Quarts
- Includes All Necessary Mounting Hardware
Included in this kit is a large 19-row oil cooler and thermoplastic oil sandwich plate that will cool down your oil system with easy under any kind of harsh driving condition in your 2015-2017 Mustang. The included oil cooler is mounted to the front of your Mustang for maximum air flow potential to cool your EcoBoost’s oil system down. Also included are braided stainless steel lines and -10AN fittings for an easy installation.
With temperature decreases of up to 40F degrees, the included thermostatic oil sandwich plate proves that this oil cooler kit can withstand the most extreme driving conditions. This oil sandwich plate is built from 6061 aluminum and prevents oil flow to the cooler until the engine oil reaches activating temperature allowing for a quicker warmup at startup and increased oil system protection in cooler climates. This particular kit from Mishimoto features a stealthy black finish for a aggressive look.
- (3) Mounting Brackets and Spacer
- (1) 19-Row Oil Cooler (Black)
- (1) 4' 3.5" Stainless Steel Braided Hose with 45 degree and 120 degree -10AN Fittings
- (1) 4' 10.5" Stainless Steel Braided Hose with 90 degree and 120 degree -10AN Fittings
- (1) Thermostatic Oil Sandwich Plate
- (1) 185F Degree Thermostat
- (1) 1/8” NPT Threated Hole For Oil Sensors
- (1) 3/4 x 16 Stainless Steel Sandwich Plate Adapter
- (2) M20 x -10AN Straight Fittings
- (1) Mounting Hardware Set
So what are you waiting for? Order a Mishimoto Black Oil Cooler Kit with a Thermostatic Oil Sandwich Plate for your 2015-2017 EcoBoost Mustang from CJ Pony Parts today!
Similar Mustang PartsMore Oil System
Product ReviewsWrite a review
You Might Also Like
MRT Turbo-Back Exhaust System High-Flow Catted 3" To 2-1/2" Stainless Steel With 4" Tips Fastback EcoBoost 2015-2017/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$1,399.99
MRT Turbo-Back Exhaust System Off-Road 3" To 2-1/2" Stainless Steel With 4" Tips Fastback EcoBoost 2015-2017/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$1,299.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$327.24
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$242.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$120.00
Ford gives a V8 Mustang a factory oil cooler, but not the 4 cylinder, which in our opinion can really benefit from something like this since that car gets driven quite hard. The Mishimoto is the perfect choice to add an oil cooler to your ECO boost mustang. Starts with this 19 row stacked oil radiator that's going to go through a pair of stainless steel braided lines up to this thermostatic sandwich plate. The sandwich plate's going to bolt between your oil filter and your engine. That's where it's actually going to draw oil for the oil cooler assembly. This is a built in thermostat, so actually not circulate oil through the cooler until your car is up a temperature. That's great for warming up and for colder climates.
Mishimoto provides all brackets and hardware necessary for installation and the black cooler is going to OEM when it's installed. These oil coolers are a great way to increase the durability and the performance of your EcoBoost engine. Keep in mind when adding oil cooler assembly, you're adding almost 3 quarts of oil to your oil capacity so when you're changing your oil, make sure you add the proper amount.