Mishimoto Black Oil Separator for 2014, 2015 and 2016 Fiesta STs.
Do you want to protect your 2014-2016 Ford Fiesta ST's engine from oil blow-by? This Black Oil Separator from Mishimoto saves your engine by reducing carbon buildup in the intake manifold and throttle body regions of your Fiesta.
Features and Benefits of the Mishimoto Black Oil Separator (MMBCC-FIST-14PBK):
- Single can mounts in-line with the PCV system to separate oil particles using 50 micron bronze filter
- Internal air diverter turbulates air longer to improve oil separation
- Silicone hoses include pre-attached stock-style quick-disconnect fittings for plug and play installation
- Silicone hoses come pre-molded for a reliable installation
- Application-specific bracket mounts the can in a serviceable location in the front of your Fiesta's engine bay
- Billet 6061 aluminum sealed can
- Defends intercooler, intake system and essential components from oil blow-by
- Reduces carbon buildup on the intake valves
- Helps maintain proper octane levels
- Filter and can are fully serviceable
Mishimoto designs and engineers this baffled oil catch can to decrease the amount of carbon buildup, which is a common problem for direct fuel injection engines. The catch can is most effective when it's placed in the vacuum assisted PCV system of your Fiesta. That's where the most oil accumulation during normal and aggressive driving occurs.
The Mishimoto Ford Fiesta ST Oil Separator utilizes a 2-port compact baffled oil catch can with a bronze filter. It is baffled internally to better separate oil from crankcase vapors. Two direct-fit silicone hoses with pre-assembled quick-disconnect fittings are included. It also comes with one direct-fit mounting bracket. It's simple to install and the can mounts in a very serviceable location.
Mishimoto is one of the global leaders in the automotive parts industry and offers enthusiasts of all levels high-quality upgrades ranging from radiators, direct-fit oil cooler kits, hoses and much more. Make sure to check out the wide variety of Mishimoto products now available at CJ Pony Parts.
Order Mishimoto's MMBCC-FIST-14PBK Black Oil Separator for your 2014, 2015 or 2016 Fiesta ST from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$745.00
CJ's Low Price:$495.00
CJ's Low Price:$500.00
CJ's Low Price:$242.99
The installation of this oil separator is actually going to be really easy. You don't need to put the car up in the air. You don't need a lift or jack stands, but the first thing we have to do is take the headlight out. Remove the two T30 bolts securing in the headlight. You also need to remove this Phillips head clip. Push back on the headlight. Disconnect the electrical connector, and remove the headlight.
Mishimoto does include a new nut and bolt to mount the bracket, but we tried to remove our nuts and bolts, it was so incredibly tight that the nuts just stripped and we couldn't remove them, but there were enough studs left on the bolt that we just threaded the Mishimoto nut onto that to secure the bracket. Slide this bracket over the studs, and thread on the supplied nuts. You can now assemble the catch can itself. Take both supplied parts, and thread it into the holes. These are tapered threads, so they're not going to seat all the way when they get tight.
Grab yourself an 11/16 wrench and tighten them up. Once again, these probably are not going to seat all the way when they're tight, and you don't want to make them too tight because you don't want to break the fittings. They are plastic. The barbs are nice and tight. This can now go on the bracket. Install the catch can onto the bracket. Line it up with the holes, and thread the supplied hardware. Now we still have to attach the hoses, so you don't need to make this super tight just yet, and it is slightly adjustable. Now we can install the hoses.
We will now be replacing this PCV hose right here with Mishimoto hose. Simply pinch this connector here, and pinch this one on the sides as well. Then use a screwdriver or a trim removal tool to remove the clip, and remove the hose. There are 2 separate hoses, and they have their own place to go. The hose with 2 bends goes up top, and the hose with 1 bend goes down bottom. Put a hose clamp on each hose, and slide it onto the catch can. Simply clip it into the factory connector. There we go, and now the top hose. Tighten up each clamp with either a 7mm socket or a flat head screwdriver. Tighten the hex bolts on top of the catch can.
Now that the catch can is completely installed, we can reinstall the headlight. Reinstall the 2 bolts that secure the headlight. Reinstall the clip, reconnect the headlight, and you're installation's finished. Our Mishimoto oil separator is installed. It's going to keep this Fiesta ST running stronger for longer. Installation should take about 30 minutes, and before you know it you'll be heading down the road.