Motor Mount Kit for all 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs with a Small Block V8 Engine.
Over the years the engine components on your 1965-1970 Mustang might need to be replaced due to constant use. If your motor mounts are worn out or damaged you might want to purchase this Motor Mount Kit fitting your 1965-1970 Mustang with a Small Block V8 Engine. This Motor Mount Kit is the most complete kit in the market, this makes it an ideal kit for anyone looking to replace all the motor mount components at once.
- Engine Frame Side Mounting Brackets
- Pair of Motor Mounts
- Body Mount Bolts to Insulator
- Motor Mount to Engine Block Bolts
The Engine Frame Side Mounting Brackets are constructed from a heavy gauge steel that is stamped to properly form a pair of coucours Engine Frame Brackets. After the brackets are stamped they are then painted in a natural metal gray finish that looks identical to the Original Ford Brackets. On each Engine to Frame Bracket an Upper Case L and R are stamped into the bracket this helps the installer identify were the bracket goes.
The motor mounts that are sold in this kit are constructed from heavy gauge steel that is painted black. The motor mounts feature a durable rubber that allows the engine to slightly move around. This prevents damage to components that are attached to the engine and transmission. Pre-slotted holes are drilled in the motor mount, which gives the installer some room when finely adjusting the engine in the engine bay.
In this Kit the correct mounting hardware is included. The Body Mount to Insulator Bolts gets used to mate the Engine Frame Side Mounting Brackets to the motor mounts on your Small Block Ford. The Mount Mounts get installed on the block of the engine with the provided hardware that is supplied with this kit.
Purchase a new Motor Mount Kit for your 1965, 1966, 1967, 1968, 1969 or 1970 Mustang with a Small Block V8 Engine from CJ Pony Parts today!
Product ReviewsWrite a review
I have a March 1965 coupe with the old style (pre-November) - can I upgrade to this kit?
I have a 1966 mustang and a 1976 351W that came out of a rv. It has the mid sump pan, will this motor mount kit work for this? Also what oil pan do I need? Thanks Danny
How do I find the manufacture date on my 65 289 v8?
will this mount kit work with a roller 302 out of an 87 Mustang into my 1966 car?
trying to install 351-c into 1967 coup with these and won't line up, any help would be appreciated.
I just bought a set of these. Do you have any instruction for mounting. Not sure which one goes on which side. I think I have them switched it pulled the motor too far forward of the car.
I have a 67 mustang w/ inline 6 i want to put a 89 foxb. 302 will this mount kit work? If not what mount kit do i need.
You Might Also Like
CJ's Low Price:$119.99
CJ's Low Price:$18.99