Multi-Color Daytime Running Light LED Board Kit with a Touch Controller for all 2013-2014 Mustangs.
Establish the ability to achieve an exceptionally unique look for your 2013-2014 Mustang by ordering this Multi-Color Daytime Running Light LED Board Kit with a Touch Controller. This kit comes with two multi-colored LED panels, as well as the drivers and controller to safely power and manage them. Completely made in the USA, these lights will make your 13-14 S197 Mustang stand out among the crowd as you cycle through the variety of colors illuminating from your headlight area, while still providing a clean & pure white LED hue when needed to be used on the road.
Features and Benefits:
- Direct Replacements
- Each Factory LED Panel is Replaced by a Set of Four RGBW 45-Mil LEDs
- White Color Chip is Independent of the Other Colors
- Includes Constant-Current & Waterproof Inductive Driver
- Comes with Touch Controller
- Powered by Parking Lights or 12V Source
- Protected by Thermal Management System
- One LED Board Panel for Driver & Passenger Side Each
- Made in the USA
This kit is highlighted by a pair of LED boards that will directly replace the original headlight daytime running lights on the driver and passenger side of your S197. Originally, the daytime running lights featured LED bars that were illuminated by two circuit boards that held white LEDs. This kit replaces each one of those white chips with a Set of Four RGBW 45-Mil LEDs.
Despite being drop-in replacements, these LEDs will produce a multi-color illumination upgrade, including a standard red, green and blue hue. There is an LED chip that is just specifically white to produce a more uniform, pure white color that is independent of the others. This will let you switch it back to white for everyday use on the road. These LEDs can be powered by your parking lights or a 12v power source. You'll also receive the inductive driver chip to safely and reliably power these lights. This driver is constant-current and waterproof for a durable and reliable performance.
An added piece of convenience and use is the touch controller that comes with this kit. This will let you change and cycle through the coloring with just the touch of a finger. You'll also be able to switch right back to the bright white color with the push of a button. This RGBW controller connects to an input plug to charge and will allow you to control the color of these LED lights whether you are in or out of your Mustang.
To ensure long-term reliability, these LEDs are protected by a thermal management system. If the temperature of the lights becomes too high for some reason, the overall output of the LEDs will be cut back. The modern constant-current driver within this kit will also make sure there isn't any damage to these LEDS from the electrical system of your S550.
*Professional installation is STRONGLY recommended, as the factory headlights must be completely disassembled, opened and resealed in order to replace the LED panels.
Tech Tip: It is recommended that you connect these LED boards to your parking light signals, as this will have your module light up when your Mustang's parking lights or headlights are turned on.
Order the Multi-Color Daytime Running Light LED Board Kit with a Touch Controller for your 2013-2014 Mustang from CJ Pony Parts today!
Similar Mustang PartsMore Mustang Parts
Product ReviewsWrite a review
How do I get these for a 2009 Mustang?
You Might Also Like
/** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$109.99