Mustang Sealed Beam Headlight (1965-1968/1970-1973) Installation Instructions

1. To start the installation of your new Mustang H6024 Sealed Beam Halogen Headlight, locate one of the two (2) headlights. Remove the three screws that hold the headlight door ring and set the ring aside.
Mustang Sealed Beam Halogen Headlights Install Image
2. Locate and remove the three screws holding in the Mustang headlight retaining ring.
Mustang Sealed Beam Halogen Headlights Install Image
3. Set the retaining ring aside.
Mustang Sealed Beam Halogen Headlights Install Image
4. Pull the old headlight out. If your headlight bowl looks like this, consider wearing gloves and check your tetanus shot history. Also, consider replacing your Mustang headlight bowls. Note the three prong connector on the existing headlight.
Mustang Sealed Beam Halogen Headlights Install Image
5. Unpack your new Mustang headlight.
Mustang Sealed Beam Halogen Headlights Install Image
Mustang Sealed Beam Halogen Headlights Install Image
6. Unhook the old headlight. Connect the three prong connector to the new headlight and repeat this process in reverse to finish installation.
Mustang Sealed Beam Halogen Headlights Install Image
7. You've now completed the installation of your new Mustang Sealed Beam Halogen Headlight!