Mustang UPR Billet Seat Release Lever (2005-2006) Installation Instructions

Tools Required:
  • Allen Wrench (included)
Install Difficulty:
  • Easy
  • Easy Project
1. To start installing your new Mustang UPR 1151-02 Billet Seat Release Lever, proceed by removing the stock plastic lever by pulling it back firmly.
Mustang UPR Billet Seat Release Lever Install Image
Mustang UPR Billet Seat Release Lever Install Image
2. Open the package containing the new UPR billet handles and hardware kit.
Mustang UPR Billet Seat Release Lever Install Image
3. Thread the set screws into each of the handles.
4. Slip the UPR Billet over the metal lever latch on your Mustang seats, push upward and hold.
5. Tighten the set screw on these Mustang billet accessories with the included Allen wrench.
6. Lower the handle to the locked position and check the functionally of your new Mustang UPR Billet Seat Release Lever by adjusting your seat's position.
Mustang UPR Billet Seat Release Lever Install Image
Mustang UPR Billet Seat Release Lever Install Image