Oracle Lighting Tinted Lens LED Reverse Light Assembly for 2015, 2016 and 2017 Mustangs.
Get the aggressive smoked out look while retaining bright nighttime visibility with this Tinted Lens LED Reverse Light Assembly from Oracle Lighting! Made specifically for your 2015-2017 Mustang, this direct-fit upgrade is a no-brainer for any enthusiast.
Features and Benefits:
- Fits Directly Into OEM Bumper Slot With Zero Modification
- Tinted Lens For Aggressive Look
- Bright 5000K Color And 2,500 Lumens of Light Output
- 27 Watts Total From CREE XP-E LEDs
- High-Power LED Bulbs For Maximum Visibility
- LED Life of 60,000 Hours
- Easy Plug-And-Play Installation
- Meets DOT, NHTSA and SAE Requirements
- Will Fit 2015-2017 V6, EcoBoost and GT Model Mustangs
- (1) 2015-2017 Ford Mustang Oracle Lighting High Output LED Reverse Light Module (3005-020)
- Detailed Installation Instructions
Coming as a complete housing upgrade for your S550, this Oracle Lighting Reverse Light (3005-020) provides 450% more light totaling over 2,500 lumens of light output. With an easy plug-and-play installation, the 27 watts of CREE XP-E LEDs shine 5000k in color for high visibility in the dead of night. Installation is a breeze and should take a novice about 15 minutes to install.
Vehicle Fitment Note: This reverse light assembly will not fit GT350 model Mustangs.
The Oracle Lighting products that are now available from CJ Pony Parts are truly some of the best and brightest on the market, guaranteeing that you can see much better, and people will have no problem seeing you coming. They utilize the latest in lighting technology, so you can be sure you're getting the most advanced products on the market.
Order the Oracle Lighting Tinted Lens LED Reverse Light Assembly for your 2015, 2016 or 2017 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
Will you need to lift the vehicle to install, or can you do it on the ground?
Please describe the tint; I would think it is "colored" plastic as opposed to a film over clear. Just would like to know. Their website didn't elaborate. Thank you.
Is the tinted version the same brightness as the clear lens? Or do you lose light?
Will it fit EU or AU mustangs or not
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$212.46
/** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$109.99
Multi-Color Daytime Running Light LED Board Kit With Amber Sequentials And Touch Controller 2015-2017/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$228.00
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$74.99
This complete replacement housing is going to bolt in place of your factory backup lit assembly and will plug into the factory plug. Instead of having one bulb or one LED bulb, you've got two rows of LEDs for total light-up of 2500 lumens. Meaning it's going to be very, very bright. This has a lifespan of 60,000 hours so no worries about it burning out and the color is going to be a 5000K which would be a nice true light.
On the back you can see the massive heat sink to keep everything cool and then the factory style plug making a plug and play installation.
Before I begin the installation here's a shot of the factory backup light as a comparison. The installation is pretty straightforward. The only tool you're going to need is a 7 millimeter socket and a decent lamp extension or a 7 millimeter nut driver like I'm using here. The first part of the installation is remove the two screws under the bumper. The reason we're removing these two is basically for flexibility. The top two screws that hold in the backup light are kind of hidden so once we remove these we can pull down the bumper, make it easier to get to them.
With these two screws out now you can push forward and get it off the clips so you can see the bumper has a lot of flexibility to it. Next step we're going to do, unplug the factory bulb and disconnect the harness over there as well. Push down the tab and pull out. Give this little clip a little tug that'll come off. Push the harness out of the way.
There's four screws to remove to remove the housing. There's two that are easy to see at the bottom and then two that are pretty far in up top here. We're going to start with the bottom ones.
Now you want the new assembly up into place. We'll start by installing the lower screws. The top screws in, put a little piece of tape or maybe a little bit of strip caulk to hold it onto your socket or nut driver make it a little bit easier to get it up in there.
We're going to attach the bottom of the bumper cover next. Make sure you push the harness out of the way.
The last step is to plug in our LED into the factory plug. You'll want to tie the harness out of the way. Throw a zip tie in here if you have one, just to keep everything up out of the way. Make sure the harness isn't near the exhaust or anything, and your installation is finished.
Here is our ORACLE LED lit up. As you see this is like a headlight for the back of your car. This is so much brighter than the factory one it's not even comparable.
Our 2015 Mustang is about 15 feet away from the wall behind us and as you can see it lights up the entire wall. If you're ever worried about seeing at night when backing up with your Mustang this is the one to go with. It's insane how bright this thing is. We have every light in our studio turned off and it lights up the entire back of it with just the backup light.
If you're really looking to light up the ground behind you when reversing you can't go wrong with the ORACLE LED backup light. Obviously you can see it's far, far brighter than a stock light or even the stock housing with an LED bulb in it. It's available in a clear lens shown here and also available in a smoke lens as well. The installation is pretty straightforward, take you no more than a half hour, and back on the road in no time.