PA Performance Alternator Power Wire Kit 110" 4-Gauge With 200 Amp Fuse 1986-2004

PA Performance: 9902-A
CJ's Low Price:
$69.99
1481068800 60542
While installing your new alternator wire kit you should also consider replacing your battery with this premium quality OPTIMA battery.
CJ's Low Price:
$274.99
Qty
Earn 69 RPM Points What's this?
PA Performance Alternator Power Wire Kit 110" 4-Gauge With 200 Amp Fuse 1986-2004
PA Performance Alternator Power Wire Kit 110" 4-Gauge With 200 Amp Fuse 1986-2004 PA Performance Alternator Power Wire Kit 110" 4-Gauge With 200 Amp Fuse 1986-2004 PA Performance Alternator Power Wire Kit 110" 4-Gauge With 200 Amp Fuse 1986-2004 Play PA Performance Alternator Power Wire Kit 110" 4-Gauge With 200 Amp Fuse 1986-2004 Video 1
PA Performance

Product Description

PA Performance 110" Alternator 4-Gauge Power Wire Kit with a 200 Amp Fuse for all 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs.

If you upgrade to a higher amp alternator in your 1986-2004 Mustang, you will want to upgrade the alternator wiring as well. Luckily, CJ Pony Parts offers PA Performance Alternator Power Wire Kits that will safely support upgraded alternators. Whenever you are dealing with wiring and the electrical system it is important to take necessary precautions and always follow the recommendations of the manufacturers.

Here, we have a complete kit to upgrade the main power feed wire from the alternator to the vehicle in most Fords. The OEM wiring in 1986-2004 Mustangs was not developed to handle higher amp alternators. This kit from PA Performance connects the alternator to the vehicle safely and extends 10 feet. In order to retain the warranty with PA Performance you must use this Power Wire Kit when running one of their upgraded alternators.

Kit Includes:
- Large #4 ultra-flexible Stereo Grade wire
- Sealed 360° crimped terminals
- 200 amp in-line fuse and holder
- Mounting screws
- Protective wire loom and wire ties
- Instructions

Additionally, you can use this kit with any alternator that has a 3/16-threaded battery (+) stud. The ring terminal on the alternator side is 1/4 I.D.

*#4 gauge wire kits are recommended on all upgrades but required when upgrading any 1993 or older vehicle with a 130-amp or 200-amp alternator.

Every kit comes with a 200-amp Littlefuse Brand fuse and holder. Littlefuse Performance has designed these fuses using the correct specifications and tolerances to come up with the appropriate rating. You should NOT increase or decrease the fuse amperage value.

*Red cable shown, actual cable has a CLEAR jacket.

PA Performance, one of CJ Pony Parts' partnered manufacturers, specializes in the production of high performance charging and starting equipment designed for a wide range of Ford Mustang and other vehicle applications. PA Performance's strict production processes and above average standards ensure that they deliver exceptional and reliable equipment to Mustang owners.

Order a PA Performance 110" 4-Gauge Alternator Power Wire Kit with a 200 Amp Fuse for your 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Alternator & Generator Wiring  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
PA Performance Alternator Power Wire Kit 110" 4-Gauge With 200 Amp Fuse 1986-2004 is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Need to adapt terminal Alternator power wire upgrade kit was fairly easy to install, except for the terminal at the starter relay on the driver side fender. I had the entire wire kit friction taped in place, rewired at the alternator, and bolted under the battery box only to find that the hole in the terminal was too small to slip over the stud (listed in step #2). I had to use a mini file to enlarge the hole to allow for installation.
Date published: 2015-10-20
  • y_2016, m_12, d_7, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_WALT12, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 108.4ms
  • REVIEWS, PRODUCT

Product Questions

Do you have installation instructions for a 2000 Mustang V6?

Asked by: wreckler64
Sorry we do not.
Answered by: rk cjpp
Date published: 2016-06-24
  • 2016-12-07T08:06CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_WALT12, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 108.04ms
  • QUESTIONS, PRODUCT

You Might Also Like