PA Performance High Torque Mini Starter 3-Speed/4-Speed 302/351W 1969-1973

PA Performance: 1881
CJ's Low Price:
$149.99
1480723200 31432
Earn 149 RPM Points What's this?
PA Performance High Torque Mini Starter 3-Speed/4-Speed 302/351W 1969-1973
PA Performance High Torque Mini Starter 3-Speed/4-Speed 302/351W 1969-1973 PA Performance High Torque Mini Starter 3-Speed/4-Speed 302/351W 1969-1973 PA Performance High Torque Mini Starter 3-Speed/4-Speed 302/351W 1969-1973 PA Performance High Torque Mini Starter 3-Speed/4-Speed 302/351W 1969-1973 PA Performance High Torque Mini Starter 3-Speed/4-Speed 302/351W 1969-1973 PA Performance High Torque Mini Starter 3-Speed/4-Speed 302/351W 1969-1973 PA Performance High Torque Mini Starter 3-Speed/4-Speed 302/351W 1969-1973
PA Performance

Product Description

PA Performance High Torque Mini Starter for 1969, 1970, 1971, 1972 and 1973 Mustangs with a 302 or 351W Engine with a 3-Speed or 4-Speed Manual Transmission.

If you've increased the compression of your engine or need a replacement alternator, PA Performance's High Torque Mini Starter for 1969-1973 Mustangs with a manual transmission is the perfect choice. The High Torque Mini Starter offers better torque, requires less cranking amps and weighs much less than the factory starter. Never worry about being stranded in a parking lot unable to start your engine.

This Ford Style Mini Starter is an upgrade for most applications prior to or near 1993. The PA Performance High Torque Mini Starter works well on higher compression engines up to 12.0:1 compression. The starter's very small size increases header clearance and reduces the effects of "hot start". Early factory field wound starters weigh around 18 lbs. The mini starters weigh in at 8-1/2 lbs. which is over 50% less than the factory starter! Even with the small package, the starter packs a bigger punch and requires less cranking amps.

*Will NOT fit Mustangs with an automatic transmission.

Includes the conversion wire kit for “Upgrade Applications” but it is not used with “Direct Replacement” applications. This unit is smaller than the early starters and the same size but with a stronger output compared to the newer (early 1990s') starters.

Purchase a new PA Performance High Torque Mini Starter for your 1969, 1970, 1971, 1972 or 1973 Mustang with a 302 or 351W Engine with a 3-Speed or 4-Speed Manual Transmission from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Mustang Parts  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
PA Performance High Torque Mini Starter Manual Transmission 289/302/351 1965-1973 is rated 3.0 out of 5 by 3.
Rated 1 out of 5 by from Did not grab the 157 tooth flywheel I purchased this for my 66 GT with the factory T-10 4 speed, factory bellhousing and factory 157 tooth flywheel. The teeth on my original ford starter had 10 teeth, this starter had only 9 teeth, and when engaged, did not grab the flywheel and grinded. I checked to make sure all was flushly mounted and properly tightened. Everything was. Its well manufactured, just didn't fit my specific combo, thankfully CJ allowed me to return this starter with no hickups.
Date published: 2015-04-27
Rated 3 out of 5 by from What we have here is a failure to communicate. Wish I had gotten the starter Snydly427 received. I had just the opposite problem. My starter had 9 teeth and the new PA Performance 1881 had 10. It was also shorter and didn't engage the flywheel. I have a 66 GT 289 4 speed as well. When researching online it appears that most sites have no idea the difference in starters for these engines. I had my starter rebuilt for $50. Works great. CJ did refund me but its a hassle to get parts that don't match up.
Date published: 2016-07-28
Rated 5 out of 5 by from Wonderful starter I and previously bought a different starter and then ode turned out to Be to long. Bought this one and instead and was a perfect fit! Turns the motor over effortlessly!
Date published: 2015-01-08
  • y_2016, m_12, d_2, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_STR1881, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 118.52ms
  • REVIEWS, PRODUCT

Product Questions

Will this work with my 351w and T5?

Asked by: Trinks
This will fit on a T5 that is using a 4 speed bell housing with adaptor plate. P/N: STR1806 would be used on applications using a T5 and T5 bell housing.
Answered by: CJPP Dave
Date published: 2016-11-02

Will this fit the 351 Cleveland with a T-5 transmission conversion?

Asked by: Cookie
Depends on what bellhousing you are using. if you are using the T5 bellhousing this would be incorrect for your application and you would want a late-model starter. If you are using the factory bellhousing with an adapter plate this would be suitable for your application.
Answered by: CJ Pony Parts Justin
Date published: 2016-11-02

Can this starter be used with a 164 tooth flywheel?

Asked by: CJLO
It is for 157 tooth flywheel.
Answered by: rk cjpp
Date published: 2016-01-15

I Have 1986 mustang 302 4 speed will this fit

Asked by: catgt50
It should.
Answered by: CJ Pony Parts
Date published: 2015-08-05

will the1881 pa performance high torque mini starter work ona 1973 inline six 250 with 3 speed manual trans

Asked by: kenny 1
No, it's for small block V8s only.
Answered by: CJ Pony Parts
Date published: 2015-07-27
  • 2016-12-03T07:54CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_STR1881, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 126.3ms
  • QUESTIONS, PRODUCT

You Might Also Like