Black with Red Stitching Alcantara Parking Brake Boot for all 2015, 2016 and 2017 Mustangs.
Owners of the 6th Generation Mustang are constantly looking for easy ways to make their S550 really stand out from the crowd. If this sounds familiar, look no further than this Black with Red Stitching Alcantara Parking Brake Boot for your 2015-2017 Mustang!
This beautiful Alcantara interior piece is designed to match perfectly to the very popular GT350R steering wheel, but will also be right at home in any 2015-2017 Mustang. The Black Alcantara with Red stitching will go great with the other available pieces at CJ Pony Parts. We currently offer a matching Manual Shift Boot (P/N: MSB22), Automatic Shift Boot (P/N: ASB1) and Console Lid Cover (P/N: CONLC1), all of which are available separately. These available components will truly add a sporty look and feel to the interior of any 2015-2017 Mustang.
Features and Benefits:
- Durable Heavy-weight Black Alcantara
- UV-stable Red Stitching for Prolonged Longevity
- 100% Handmade for a OE Fit and Finish
- Designed to be a Do-It-Yourself Modification
- Installation Instructions are Available
- Includes a New Zip Tie
- Made in the USA
*Identical match to the Black Alcantara and Red stitching found on the GT350R Steering Wheel, P/N: M3600M350R.
Tech Tip: Alcantara products tend to attract dust over time so quick wipes with a damp microfiber cloth will help keep them clean.
All of the Alcantara Interior pieces that we offer are manufactured and designed right here in the USA using heavy-weight Alcantara Suede and OEM matched UV-Stable thread for the stitching. Installation instructions for all of the available parts are linked in each product page along with our installation videos. If you are looking for a similar part to match the GT350 Steering Wheel, see P/N: PBB3. But if you are interested in a complete solution in this color scheme for your 2015-2017 Mustang, see P/N: ITK25 for a Manual Transmission Kit or P/N: ITK27 for an Automatic Transmission Kit.
Please Note: These are NOT complete replacement assemblies, this is replacement upholstery for your existing material and does NOT include new frames or trim. Installation will require you to disassemble your factory components and use spray/brush-on adhesive and/or staples for installation. Even though this is something you can install yourself, for the best possible result - PROFESSIONAL INSTALLATION IS HIGHLY RECOMMENDED.
Order this Black with Red Stitching Alcantara Parking Brake Boot for your 2015, 2016 or 2017 Mustang from CJ Pony Parts today!
Similar Mustang PartsMore Consoles
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$419.00
CJ's Low Price:$49.99
For this installation you need a small plastic ply bar, a quarter inch ratchet, seven millimeter socket, flat-head screw driver, cutting pliers, and adhesive. The first step of the installation is going to be to remove the shift knobs and then we can remove the shift boot. Get the shift boot off its little rubber tray here, pull the tray out first. I'm going to grip on the front, and there's going to be clips all the way around that hold it on. Now we're going to separate the lockout from the shifter mechanism, in our case we actually have an aftermarket lockout, we have a Barton on this car. If you have a stock one, you simply pull these three clips, one here, one here, and one here, pull back and then I'm going to pop out. The Barton is going to be a little bit hard because it's one solid ring all the way around the bottom.
The next step of the process is to remove these plastic side panels, there's one each side, they're held on by clips, we're going to remove these to access the two-seven millimeter screws underneath them. Then we open our console lid and carefully pry the back up. Make sure I didn't disconnect the lights. The boot's now held on by two screws, one upfront here, and one towards the back. Now you want to pull the boot up over the handle, and there's going to be a zip tie holding it in place. Got that and remove it. The boot out of the car, now we're going to peel away from the factory frame. I'm going to go back through and make sure that all the material is off of it, if not you won't get a good adhesion with the new one.
Now you're prepared to glue on our new piece, we're going to grab our 3M Trim Adhesive, put a thin layer glue on the outside edge of the boot, making sure we don't get any on the surface itself. We're going to do the same thing on the trim ring. I'll let that sit up for a few minutes until it's no longer wet and just tacky, then we're going to start installing our shift boot. We're going to start by putting the front seam-line, there's a little cutout, look, there you can see where that winds up. I'll do the rear next. Now I'll just let it sit up a little bit before we put it back in the car. We're going to reinstall it in the vehicle, first you're going do, I'm going to turn the shift through inside out. Now what you're going to do is slide it over the handle, again right through the spot here, this is where the factory zip tie is, this is where we're going to install our new zip tie.
Make sure that seam is covered then put the new zip tie on. Then we're going to fold it back into place here, and bolt it down. Now we can reinstall our console, and then bring the console back in. Now we're going to reinstall the hardware on the side panel. Now we're going to reinstall the panel that we removed earlier. We're going to repeat the process on the other side, reinstall the boot knob and your installation's finished. As you can see the Alcantara parking brake boot looks OEM when it's installed. It's the perfect match for the GT350R steering wheel and looks great with a console lid and the shift boot we added as well. Overall it's a great package, it really transforms the interior of a 2015 GT. Figure about an hour for installation, you're back on the road in no time.