Master Power Dual Bowl Brake Conversion Kit for all 1965-1966 Mustangs with an Automatic Transmission.Does the old stock disc or disc and drum brake set up in your 1965-1966 Mustang feel too outdated and perhaps lack the stopping power necessary for completely safe stopping? This Master Power Brake Conversion Kit for all 1965-1966 Mustangs is just for you, if you don't mind making some progressive modifications that sacrifice an all original restoration for greatly increased stopping power and reliability!
- 7 Inch Dual Diaphragm Power Booster
- 1" Bore Dual Bowl Master Cylinder and a Plastic Reservoir
- Vacuum hose kit (Bleeder kit, 2 vacuum hoses, male elbow fitting, male inverted fitting)
- Booster Mounting Brackets and All Necessary Hardware
- Firewall Boot
This Master Power Brake Conversion Kit for all 1965-1966 Mustangs with an automatic transmission, is an all inclusive, complete brake conversion kit that allows you to switch out your old disc brakes, or front disc and rear drum brake set up; to an upgraded, more efficient new braking system. This kit from Master Power lets you easily convert to power brakes without wasting excessive time and money searching for all the correct pieces to complete the job part by part. Everything you need is right here!
*Works with front drum or disc brakes but will not work on cars with four disc brakes.
*Requires dual bowl conversion lines when replacing a single bowl master cylinder.
*Test the brakes in a safe area before driving. If the pedal is spongy, re-bleed the system and try again.
Similar Mustang PartsMore Mustang Power Brake Boosters & Power Brake Conversion Kits
Product ReviewsWrite a review
Will this kit require any modification/cutting anywhere? Does it clear all existing components? Thanks
That's hard to say without knowing anything about your Mustang. It's likely that it won't, but I'd encourage you to read over the installation instructions, which are linked from the product page, and should give you a good idea of what your installation would look like.
Date published: 2015-04-14
What master cylinder will work on a 1968 mustang with 4 wheel discs?
No, this only works on 1965-1966 Mustangs.
Date published: 2015-03-09
You Might Also Like
CJ's Low Price:$473.99
CJ's Low Price:$473.99
CJ's Low Price:$463.99
CJ's Low Price:$18.99
CJ's Low Price:$22.99
By Bill Tumas: We're here with a power brake conversion kit for your '64 through '66 Mustang from Master Power. This is the perfect kit if you're looking to convert to power brakes but aren't worried having original parts. That includes the booster itself, push rod, the master cylinder, and a complete kit of hardware to bleed the cylinder before you install it. It will only work when your '64 through '66 Mustang equipped automatic transmission and does require the use of the conversion lines, due to the fact that you're going to a dual bowl master cylinder as well. This kit is an excellent upgrade for your '64 through '66 Mustang with an automatic transmission. Get the benefit to power brakes, also the safety benefit of upgrading to a dual bowl master cylinder. They work with both disk and drum front brakes but will only work with drum rear brakes.