Power Steering Control Valve Seal Kit for all 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs with Factory Power Steering.This Power Steering Control Valve Seal Kit has everything you need to reseal the original power steering control valve on your 1965, 1966, 1967, 1968, 1969 or 1970 Mustang. This Power Steering Control Valve Seal Kit includes the correct seals, gaskets, o-rings, an adjusting nut, a clamp and other necessary hardware that will help you stop any leaks that may have developed. Over the years of use and exposure to heat and the elements your Mustang is going to need parts fixed, repaired and replaced, and the power steering control valve is no exception.
This Control Valve Seal Kit does not include a stud socket or a ball stud, so if you need to replace those too, then it is recommended to get our more complete Control Valve Repair Kit. This kit is intended to just alleviate troublesome leaks and bad connections at seals, o-rings and gaskets, giving your 1965-1970 Mustang's power steering control valve a good tightening up and sealing off. This will encourage proper power steering fluid transfer and containment, increasing the effectiveness your ability to steer and the ease in which it is done.
If the original power steering in your Mustang has become less responsive or is malfunctioning completely, CJ Pony Parts offers a multitude of classic Mustang steering components to upgrade, repair or replace it with. Now you can rely on your Mustang’s steering for many years to come, original or updated, with all of the great high quality parts we have to offer! Ordering any of CJ Pony Parts more than 500 steering parts for any year Mustang is easy--order online now or give the sales team a call anytime!
Product ReviewsWrite a review
Power Steering Control Valve Seal Kit 1965-1970 is rated out of 5 by 2.
Rated 5 out of 5 by USN Mustang from Complete seal kit!! This is a great kit! The best part is it not only comes with the seals needed to stop any annoying leaks, but it has the bushing that go into the seal ends. Not all kits have these, including some of the larger rebuild kits. I bought this and installed on my 1970 Mach 1, no more small drip marks in the garage! Very happy.
Date published: 2015-02-09
Rated 5 out of 5 by Sprint69 from Good product This kit works well but does not include instructions. If you google bendix control valve for the applicable years, you can find a diagram showing a pictoral view of all the pieces. You have to remove the ball stud to get this completely apart so make sure you get those pieces as well.
Date published: 2015-07-24
You Might Also Like
CJ's Low Price:$1,030.99
CJ's Low Price:$472.99