Power Steering Pressure Hose From Pump To Hydroboost 57-3/8" Mach 1/Cobra 2003-2004

CJ's Part Number: PSHP58
CJ's Low Price:
$69.99
1480723200 66587
It may be time to update your pony's power steering pump, too!
CJ's Low Price:
$248.99
Qty
Earn 69 RPM Points What's this?
Power Steering Pressure Hose From Pump To Hydroboost 57-3/8" Mach 1/Cobra 2003-2004
Power Steering Pressure Hose From Pump To Hydroboost 57-3/8" Mach 1/Cobra 2003-2004 Power Steering Pressure Hose From Pump To Hydroboost 57-3/8" Mach 1/Cobra 2003-2004 Power Steering Pressure Hose From Pump To Hydroboost 57-3/8" Mach 1/Cobra 2003-2004 Power Steering Pressure Hose From Pump To Hydroboost 57-3/8" Mach 1/Cobra 2003-2004 Power Steering Pressure Hose From Pump To Hydroboost 57-3/8" Mach 1/Cobra 2003-2004

Product Description

Power Steering 57-3/8" Pump to Hydroboost Pressure Hose for all 2003-2004 Mach 1 and Cobra Mustangs.

If you've noticed issues when it comes to steering in your 2003-2004 Mach 1 or Cobra Mustang, odds are you have a worn or leaky power steering hose. Pick up this 57-3/8" Pump to Hydroboost Pressure Hose from CJ Pony Parts today and get your pony back into working order!

This direct-fit replacement pressure hose has a tubing that is terne-coated along with fittings that are zinc-chromate plated, resulting in a final product that is rust resistant over time. It is also highly resistant to issues that may come from excess oil, high temperatures or the ozone. This high-quality hose can withstand internal oil temperatures up to 300 degrees Fahrenheit, which makes it a smart investment for your Mach 1 or Cobra Mustang.

Hydroboost Pressure Hose Features and Benefits:
- Direct OE Replacement
- Connects the Power Steering Pump to Hydroboost
- 57.375" (57-3/8") Hose Length
- End 1 - 16mm Swivel O-Ring
- End 2 - 18mm Swivel O-Ring
- 1,500psi Pulse Pressure Rated
- 8,900psi Burst Pressure Rated
- Manufactured from Double Piles of High Tensile Strength Braided Fabric
- Withstands Internal Oil Temperatures up to 300 Degrees Fahrenheit
- Highly Resistant to Issues from Oil, Heat & Ozone
- Fittings are Zinc-Chromate Plated
- Tubing is Terne-Coated
- Corrosion Resistant

This power steering pressure hose will connect your power steering pump to your hydroboost and will act as a direct OE replacement for your wont out or leaky original. Crafted from double piles of high tensile strength braided fabric, this hose is resistant to pulsating pressure up to 1,500 psi as well as bursting pressure up to 8,900 psi. 57.375 inches in length, this hose will connect to the pump & hydroboost through a 16mm swivel o-ring on one end and an 18mm swivel o-ring on the other.

Please Note: Some 2003 DOHC Mustangs used 16mm fittings on both ends of their pressure hose. The fittings on your original factory power steering hose will need to be measured. PSHP54 uses 16mm fittings on both ends, and this hose (PSHP58) uses 16mm and 18mm fittings.

Order a new Power Steering 57-3/8" Pump to Hydroboost Pressure Hose for your 2003-2004 Mach 1 or Cobra Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Power Steering Pumps  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 128.01ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 127.34ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like