Front Door and Rear Quarter Power Window Kit with Black Console Mount Switches for all 1971, 1972 and 1973 Mustangs.Add the luxury of power windows to your classic Mustang with this Front Door and Rear Quarter Power Window Kit featuring Black Console Mount Switches for all 1971, 1972 and 1973 Mustangs! This kit comes with new power regulators featuring AC Delco motors for the front door windows and roll-up rear quarter windows, black illuminated double button switches that can be mounted to your console or dash, complete and labeled wiring harnesses, as well as conduit to protect the wires traveling through the doors.
The kit comes with everything you need to convert from those tiring manual crank windows to modern push-button power windows. If your 1971-1973 Mustang came from the factory without power windows, this is the perfect kit for you!
- New Power Regulators (4)
- New AC Delco Power Window Motors (4)
- Black Illuminated Double Button Switches (2)
- Complete and Labeled Wiring Harnesses (2)
- Conduit (2)
You can count on these new power window regulators to last because they are built right here in the USA. Constructed from 1018 cold roll steel with bronze Oilite thrust bearings at all the pivot points and feature treated gear plates for longer teeth life. The new power window regulators are designed to bolt directly into the original mounting holes with little to no modifications and will use the original glass channels. Each window regulator is equipped with a new AC Delco OEM motor, insuring the highest of quality and performance every time you hit the switch.
The switches in this kit are intended for mounting to the console or dash, but can be mounted anywhere you desire. Each switch features a double button setup that will control 2 windows. The switches are black with white markings and can be illuminated with the correct wiring configuration. With complete and labeled wiring harnesses already attached to the switches, installation is as simple as finding a location to mount the switches, running the wires and you're ready to go!
The wiring harnesses come with all the wires labeled for correct positioning and are fused to allow operation of the power windows without the engine running. The black wire is the ground and should be attached to clean metal to ensure a proper ground. The red (orange) wire is the 12V hot feed.
*Not for use on Mustangs with factory power windows.
*The power regulators for the rear quarter windows are only for 1971-1973 Mustangs that were originally equipped with roll-up windows.
Please Note: We recommend using a kit with crank handle style switches so you are not left with a hole in your door panels where the factory regulator would come through.
CJ Pony Parts offers a unique selection of Power Window Kits for all 1971, 1972 and 1973 Mustangs. With kits including a variety of custom switches and complete wiring, there is a Power Window Kit for any resto-mod project!
Similar Mustang PartsMore Mustang Window Components
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$1,224.99
CJ's Low Price:$1,069.99
CJ's Low Price:$824.99