Front Door and Rear Quarter Power Window Kit with Crank Handle Switches for all 1971, 1972 and 1973 Mustangs.Add the luxury of power windows to your classic Mustang while retaining the factory look using original window cranks with this Front Door and Rear Quarter Power Window Kit featuring Crank Handle Switches for all 1971, 1972 and 1973 Mustangs. This kit comes with new power regulators featuring AC Delco motors for the front door windows and roll-up rear quarter windows, power crank handle switches for original window cranks, a complete and labeled wiring harness, as well as conduit to protect the wires traveling through the doors.
The kit comes with everything you need to convert from those tiring manual crank windows to a custom power window setup with power crank handle switches that reuse your original window cranks handles. If your 1971-1973 Mustang came from the factory without power windows, this is the perfect kit for you!
- New Power Regulators (4)
- New AC Delco Power Window Motors (4)
- Power Crank Handle Switches (4)
- Complete and Labeled Wiring Harness (1)
- Conduit (2)
You can count on these new power window regulators to last because they are built right here in the USA. Constructed from 1018 cold roll steel with bronze Oilite thrust bearings at all the pivot points and feature treated gear plates for longer teeth life. The new power window regulators are designed to bolt directly into the original mounting holes with little to no modifications and will use the original glass channels. Each window regulator is equipped with a new AC Delco OEM motor, insuring the highest of quality and performance every time you hit the switch.
This kit includes power crank handle switches that are controlled by pushing down on the crank handle to lower the window and pulling up on the crank handle to raise the window. These crank handle switches mount behind the door panels and the rear quarter trim panels and allow the use of original window crank handles. The original window cranks mount directly on to the new power crank handle switches the same way they would mount on to the factory manual window regulators. There is no right or wrong position for the window cranks once installed on the crank handle switches; placement is entirely up to you.
The wiring harness comes with all the wires labeled for correct positioning and is fused to allow operation of the power windows without the engine running. The black wire is the ground and should be attached to clean metal to ensure a proper ground. The red (orange) wire is the 12V hot feed.
*Not for use on Mustangs with factory power windows.
*The power regulators for the rear quarter windows are only for 1971-1973 Mustangs that were originally equipped with roll-up windows.
Please Note: We recommend using these crank handle style switches so you are not left with a hole in your door panels where the factory regulator would come through.
CJ Pony Parts offers a unique selection of Power Window Kits for all 1971, 1972 and 1973 Mustangs. With kits including a variety of custom switches and complete wiring, there is a Power Window Kit for any resto-mod project!
Similar Mustang PartsMore Mustang Parts
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$1,069.99
CJ's Low Price:$824.99