Premium Standard Interior Kit With TMI Standard Upholstery And Standard Mass Back Carpet Dark Blue Convertible 1971-1973

CJ's Part Number: IK48BDUM
MSRP: $1,783.57
CJ's Low Price:
1477267200 56197
Earn 1598 RPM Points What's this?
Premium Standard Interior Kit With TMI Standard Upholstery And Standard Mass Back Carpet Dark Blue Convertible 1971-1973

Product Description

Dark Blue Premium Standard Interior Kit with TMI Standard Upholstery and Standard Mass Back Carpet for 1971, 1972 and 1973 Convertible Mustangs.

Restore the entire interior of your 1971-1973 Mustang with the most complete interior kit on the market. This is your one stop for a full interior restoration with the best quality parts money can buy. Our complete Premium Interior Kits feature high quality parts from TMI, Scott Drake and other pieces made from Ford Tooling. After the installation of a Premium Standard Interior Kit, your Mustang's interior will look and feel just like it did in 1971, 1972 or 1973.

- Full set of TMI Standard seat upholstery with seat backs
- Pair of TMI front bucket seat foam with molded listing wires
- 250 hog rings with pliers
- ACC Carpets two-piece carpet (Multiple options available) (Three-piece folddown seat carpet is included for Fastbacks)
- Original style die-cut underlayment for carpet, rear seat and differential area
- Ford Tooling dash pad
- Pair of TMI standard door panels
- Watershield set
- Door panel clips
- Pair of armrest pads
- Armrest base
- Pair of TMI original material sun visors
- TMI Tier Grain vinyl headliner (Coupe and Fastback kits only)
- Headliner insulation (Coupe and Fastback kits only)
- 16ft of TMI premium quality windlace
- Pair of Ford Tooling door sill plates with decals and screws
- Interior screw kit (See below for screws included)

Coupe Screw Kit Includes: Pillar trim, kick panel, coat hooks, sun visor brackets and rear view mirror, door sill plates and windshield trim

Convertible Screw Kit Includes: Kick panel, coat hooks, sun visor brackets and lower windshield molding, rear view mirror bracket and upper windshield molding and door sill plates

Fastback Screw Kit Includes: Pillar trim, kick panel, sun visor brackets and rear view mirror, rear air vent, rear wrap around trim, rear headliner trim, door sill plates and front and rear window trim

TMI's full set of Standard seat upholstery includes upholstery for both front bucket seats and the rear seat. Masonite wood front seat backs are also included for extra strength and long life. TMI's 1971-1973 Standard Upholstery features the correct heavy weight Corinthian grain vinyl with Ruffino grain inserts, multi-needle precision sewn seams and extruded piping made of solid color that is 23 times thicker than vinyl wrapped cord. You can expect long-lasting durability and excellent quality with this upholstery.

Multiple carpet options are available in our Premium Interior Kits from ACC Carpets. All carpet has heel and toe pads as well as a jute backing attached to the underside. You can choose standard carpet with or without mass back or cut pile with or without mass back. Standard carpet uses an 80% Nylon/20% Rayon mix with a jute backing just like the original. Mass back incorporates a tough, rubber layer between the carpet and the jute insulation that increases the form and rigidity of the carpet, while decreasing road noise. It virtually eliminates the need for Dynamat. Mass back increases the moldability, sound deadening and insulation. Cut pile carpet is similar to what is found in most domestic vehicles since 1974. ACC Carpet's nylon cut pile is constructed from 100% top quality Dupont yarn. The material is tufted on an 1/8" gauge machine with 14 ounces of yarn per square yard. It is then dyed using the finest dyes available and tested for ozone humidity fading and light fastness. Cut pile carpet will help modernize the look and feel of the interior in your classic Mustang.

Original style, die-cut underlayment is included to finish off the floor, rear seat and differential area with a perfect fit. All pieces have an asphalt layer with needled cotton just like they did from the factory.

TMI premium door panels are made with Masonite MDF wood backing which holds its shape for the ultimate in lasting quality. Masonite is extremely rigid, durable and unaffected by moisture. TMI door panels are made from heavy 30-32 ounce OEM Corinthian grain vinyl and feature original style heat seam line patterns and the original embossing effects that looks like they were done in the original Ford factory.

TMI's original material sun visors will feature a friction hinge built within each visor, a strong Masonite inner core and stainless steel end clips. Coupe and Fastback sun visors are wrapped in the correct Tier grain vinyl material while Convertibles are covered with the correct Corinthian grain vinyl material.

TMI's windlace is constructed from premium quality vinyl with a metal core that holds its original shape. This durable windlace cleans up easily and resists wear.


Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 349.71ms
  • bvseo-msg: HTTP status code of 403 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 92.9ms
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like