Procar Seat Vinyl Rally Series Driver Side

CJ's Part Number: SEAT51L-V
MSRP: $472.00
CJ's Low Price:
1481068800 42748
Earn 389 RPM Points What's this?
Procar Seat Vinyl Rally Series Driver Side
Procar Seat Vinyl Rally Series Driver Side Play Procar Seat Vinyl Rally Series Driver Side Video 1

Product Description

Procar Driver Side Rally Series 1000 Vinyl Seat.

Sensible styling is the hallmark of a Procar seat. The clean, vertical stitching gives these seats a vintage look while the pronounced side bolstering offers added support under hard cornering. Procar seats always look like they were meant for your car! Features adjustable headrests, map pockets and reclining backrests.

Upgrade the quality and comfort of your vehicle when you go with a Procar seat installation. The all-steel, TIG-welded frame is electrostatically coated for strength and durability. Premium grade fabrics and stitching will stand up to years of wear and tear. Ergonomically shaped cushions made with hi-density, injection-molded foam ensure comfort with the proper support.

*1965-1967 rear seat matching upholstery is also available.

Similar Mustang Parts

similar Mustang parts More Seats  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Procar Seat Vinyl Rally Series Driver Side is rated 4.7 out of 5 by 3.
Rated 5 out of 5 by from Comfortable These seats are much more comfortable than the stock seats. Side bolsters are very aggressive and can be tight against a center console, but other than that they keep you in the seat under "spirited driving"
Date published: 2015-01-07
Rated 4 out of 5 by from Good seat... However... If you're fitting this in to an early mustang (I have a 67) be prepared to lower you're seat pans. I'm 6'2 and with normal sized seat pans, the adapters - sliders and seats themselves, this leaves little head room before roof. I lowered my by 2in.
Date published: 2016-02-15
Rated 5 out of 5 by from Size does matter I'm 6'3" tall and most seats make my neck snap. which seats are the tallest. It's ok if it's got a headrest.
Date published: 2016-03-30
  • y_2016, m_12, d_2, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_SEAT51L-V, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 16.86ms

Product Questions

So this doea come with the seat frame/ tracks beneath

Asked by: Ryanzep
It does come with a universal seat track, you will have to purchase seat tracks that are specific to your application.
Answered by: rk cjpp
Date published: 2016-05-17

Hi do you deliver to Australia

Asked by: Dominic67
Yes we do. To get a shipping quote and total price, add the item(s) to your shopping cart and then proceed to checkout. In checkout, fill out your address info and scroll down to see shipping options and costs to your area including any import taxes and duties.
Answered by: CJPP Dave
Date published: 2015-12-18

is this seat available in black velour . do you need a mounting kit and what is the cost to ship to mount pearl NL , CANADA - A1N2T3

Asked by: jay64
Look up CJ part #s SEAT57L-V and SEAT57R-V. You do need a mounting kit/track- one that's specific to your Mustang. To get a shipping quote, add all of that to your shopping cart and proceed to checkout. In checkout, fill out your address info and scroll down to see shipping options and costs to your area.
Answered by: CJ Pony Parts
Date published: 2015-09-29

do I need to purchase the stock seat sliders to mount the Procar seat in a 66 mustang. In other words what do I need when purchasing a Procar seat and get it install in a 66 Mustang

Asked by: eves
You can't use the stock sliders/seat track. Use CJ part # STP1 for your 1966.
Answered by: CJ Pony Parts
Date published: 2015-08-27
  • 2016-12-01T08:01CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_SEAT51L-V, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 180.95ms

You Might Also Like

Product Video

Procar Seat Vinyl Rally Series Driver Side Video Transcript
By Bill Tumas: One of the best ways to finish off the interior of your Mustang is with a nice custom seat. While there are some decent factory options out there, nothing takes your Mustang's interior to the next level like a true custom bucket. Today, we'll take a look at some custom seats from Procar.

One of our more popular seats for the early Mustangs is the Procar Rally seat. It's available in a black, beige, blue, gray, maroon, red or white vinyl, or your choice of black or gray velour. The seat has a nice vintage look to it and large bolsters, as well as an adjustable headrest to keep you planted in the seat.

An all steel tig welded frame is going to ensure durability, and you also have a nice map pocket located in the back and they are fully adjustable. Matching upholstery for the rear seat is available for your '65 through '67 coupe, convertible, or fastback.

The Procar Elite seat is right at home in your late model Mustang or your classic, as well. These are also available in a black, beige, blue, gray, maroon, red or white vinyl, as well as a black or gray velour finish. These seats are fully adjustable as well, with an adjustable headrest and large bolsters on both the back and the bottom of the seat. These seats will tilt forward for people to access the backseat, and the back of the seat is equipped with a map pocket.

The Procar Classic seat is a perfect choice for your early Mustang. It even matches the original seat design pretty closely. They're available with or without upholstery, so you can upholster them to match your interior, if necessary. If you choose to go with upholstery, they're available with a black, beige, gray or white vinyl or a black and white velour. They're also available with or without the adjustable headrest. They feature a full steel frame that again is tig welded for durability, matching rear seat upholstery for a '65 through '67 coupe, convertible, and fastback is also available. Unlike your factory seats, the backrest is ratcheting and fully adjustable.

The Procar Evolution is the most aggressive modern looking seat that Procar offers. It's a narrow fit designed for more racing applications, yet it's perfectly at home in a street car as well. It's got aggressive bolsters, while they're openings for a 5-point racing harness.

It's available in all black finish, black and gray, black and yellow, black and ivory shown here, black and red, as well as black and blue. The seat has a fully adjustable backrest and uses a complete carbon fiber exposed back.

To give you an idea of the size of each seat, we're going to have Sean give us a hand. Sean is six foot one, roughly 185 pounds. It will give you a good idea of how an average person is going to fit in the seat.

Scat offers a wide range of seats that are suited for both early, as well as late model applications. All of the seats include sliders, with mounting brackets available for many of the early models.