JLT Black Textured Series 2 Fenderwell Cold Air Intake Kit for all 2003-2004 Mach 1 Mustangs.

Using the original JLT cold air intake as a guide, JLT molded, scuplted and perfected everything until they had the best looking, fitting and performing system you can buy. The all new JLT Series 2 intake tube is 4-1/4" ID, roto molded black textured plastic for it's resistance to engine heat while keeping the intake air charge nice and cool. No metal tubing here! Gains of 14-20 RWHP are typical with this kit.

The MAF and air filter have been relocated into the fenderwell for a cooler intake charge. Works with both 80mm and 90mm MAF's, there is no need to buy additional parts when you upgrade to a 90mm MAF. Uses the factory "S" style PCV hose.

The best part about the new Series 2 intake is JLT kicked the cool factor up a notch and molded a 105mm MAF housing right in the tube. Now you have a kit you can grow into and not have to buy a complete new kit when you reach 550-600 RWHP. Putting a Whipple, Kenne Bell or Eaton blower on your Mach 1? Simply drill out the pre-molded plug on the MAF block located on the bottom of the tube, discreetly out of sight. Install your SCT MAF sensor electronics, add a huge 4-1/2x12 S&B Powerstack air filter and you’ve now changed your JLT Cold Air Intake into a JLT High Boost 12” Intake. Molding the MAF into the tube makes for a much smoother air flow with no couplers, reducers or separate MAF housing and can support 800+RWHP.

Kit Includes:
- JLT black textured plastic intake tube
- Silicone coupler
- Silicone reducer
- Apron plate
- 4x9 S&B Powerstack air filter
- Silicone MAF spacer
- MAF adapter
- MAF adapter gasket
- Heavy duty clamps and all necessary hardware

*Stock Shaker system is NOT used with this kit.
*Will NOT fit with most strut tower braces.

Please Note: The air filter is positioned at a low level in the bumper to get the coolest air possible. While driving in the rain is not an issue, you MUST be aware of flooded streets and deep puddles.

Manufacturer Instructions

Customer Review Summary

Fits these Ford Mustangs:

• 2003
• 2004

More Mustang Parts From:

• JLT Performance

Related 1964-1973 Mustang Parts Categories:

Related 1979-1993 Mustang Parts Categories:

Related 1994-2004 Mustang Parts Categories:

• 1994-2004
• Engine
• Cold Air Intakes

Related 2005-2009 Mustang Parts Categories:

Related 2010-2014 Mustang Parts Categories: