Product DescriptionEdelbrock Performer RPM Flat Tappet Cam and Lifter Kit for Mustangs with a 351W Engine Block.
Designed for street high-performance applications, cams provide power from 1500-6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. Screw-in studs and guideplates required.
-Duration at 0.006" Lift: Intake: 290?/Exhaust: 300?
-Duration at 0.050" Lift: Intake: 224?/Exhaust: 234?
-Lift at Cam: Intake: 0.310"/Exhaust: 0.325"
-Lift at Valve: Intake: 0.496"/Exhaust: 0.520"
-Intake: 6? BTDC/38? ABDC
-Exhaust: 51? BBDC/3? ATDC
-Centerlines: Lobe Separation - 110?/Intake Centerline - 106?
CAUTION: Use Edelbrock Performer-Plus Timing Chain and Gear Set (TCGS7) or Accu-Drive gear drive (TCGS9). Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three key-ways for specified timing selection.
*Do not use dual valve springs.Use Edelbrock Sure Seat valve springs.
*Use stock ratio (1.6:1) rocker arms only.
Similar Mustang PartsMore Mustang Camshafts, Rocker Arms & Valve Train
This product will fit the following Ford Mustang years:
- Not Yet Rated
- 0 Reviews
You Might Also Like
Retail Price: $65.95
CJ's Low Price: $52.99