We're here with this full front replacement frame rail for your '64 through '70 Mustang Coupe, Convertible, and Fastback. All of our frame rails come ready to install with all your holes predrilled.

Starting in the front there's a proper hole for the J-nut for your front valance hardware. Both holes for your front bumper bracket are predrilled, and the nuts are welded for mounting on the inside. The holes for your brake and fuel line clips are already installed, as well as the holes for your steering box. On the top of the frame rail, both holes are already drilled for your clutch linkage and have welded nuts for mounting.

Moving further down, your strut bar and sway bar mount is already welded to the frame rail. That's welded in the proper location for a '67 through '70 Mustang. If you're installing this frame rail on a '65 through '66, you'll have to move this an inch and a half forward. Moving to the bottom of the frame rail you’ll see drilled and threaded holes for both your cross member and your slave cylinder.

Due to the unibody design of our Mustang, the front frame rail is a very important part of the structure. You want to make sure you use a high quality replacement, such as our one piece rail, and we suggest having it professionally installed.

Overall Rating: 5/5

• 5 Stars
• 1 Reviews
• Write A Review

Write Your Own Installation Instructions And Receive Up To $250!

Overall Rating: 5/5

• 5 Stars
• 1 Reviews
• Write A Review