i attempted to purchase this as a kit (engine mounts and frame mounts together) but they were on back order. CJ sent me these and then the motor mounts separate a little later. No big deal except that even with no motor attached to the engine mounts the holes on the block mounts and frame mounts were misaligned so badly that I could not pass the coupling pin through the two mounts. I would agree with the other customer that you should get them as a kit or possibly buy more expensive mounts to begin with. Either way, before you attempt to install them make sure you are able to pass that bolt through the two sets of mounts
CJ Pony Parts, along with many other parts houses, does NOT specify a little quirk about Mustang motor mounts and frame brackets. 1967 had a different style motor mount! Be warned. You need to buy your engine brackets AND motor mounts TOGETHER. Don't take the chance, just replace them both as a pair. 1967 Brackets/mounts are hard to come by, so most are actually the 1968 style. My recommendation is if you don't know what you have, look it up and find out. Just be advised.