My original Rocker trim was dinged, dented and scratched. I tried to polish them out, but to no avail and checked out CJ Pony Parts. I was surprised they had them, and yet more surprised that Scott Drake made them, however, I've learned with aftermarket parts, fit is not exact. I've only installed one on my rocker panels, and it would be the smallest one. They don't have the cutout - to get the spring loaded pieces that the rivet attaches to, so I had to cut my own cutout with a Dremel and small cut off wheel. I also noticed that the originals had curves into the trim near the wheel well, and these didn't, so I had to grind the curve myself. I'm not sure if the 4 larger pieces will need modifications or not, but it turned out well, and looks a thousand times better than the originals.