QA1 Tubular K-Member for all 1996-2004 4.6L Mustangs. Fits both 2V/4V Engines.Replace your heavy stock K-member with one of these QA1 tubular K-members and take 28 lbs. off of your vehicle's total weight. You'll get better steering geometry, less bump steer, reduced dive under braking, and quicker straight-line performance, all thanks to the weight savings.
QA1's tubular K-members are designed from the ground up for weight savings, improved geometry and as a bolt-in swap for the factory K-member. All mounting points have been digitally indexed from new, factory K-members. Header and oil pan clearance are maximized for easier maintenance and installation. Bump steer, anti-drive and Ackerman angles have been improved for maximum performance. If the vehicle has been modified, there is a potential for tire to fender clearance issues. This k-member will change the vehicle's stance to a performance race stance!
*Will work with stock or aftermarket lower control arms.
*Can be used with factory style springs or coil over kits. Spring perches are removable for extra weight savings when using coil over kits.
Product ReviewsWrite a review
So they come with spring perch or do have to buy some. And do the have the holes for the rack.
*Will work with stock or aftermarket lower control arms. *Can be used with factory style springs or coil over kits. Spring perches are removable for extra weight savings when using coil over kits. The mounts for the steering rack are part of the crosmember.
Date published: 2016-06-10
You Might Also Like
CJ's Low Price:$799.99