Race Star Industries Open End Lug Nut Half Kit for Direct Drilled Wheels.This kit from Race Star Industries includes everything you need to mount a pair of Race Star direct drilled wheels to your Mustang. Open end lug nuts are typically required when using longer aftermarket lug studs.
-10 lug nuts
-2 chrome valve stems
-Hub centric rings
-1 chrome thin-wall socket
*Must be used when mounting Race Star wheels.
Please Note: The Race Star Industries lug nut kits use a washer that goes between the wheel and the shank lug nut. The washers are slightly curved into a dome shape, they are not flat. The bezel side of the washer should face the lug nut. Most of the washers will say 'WHEEL SIDE' so that it is easier to determine which side goes to the wheel, but some of the washers are marked with just a 'V', which should also go on the wheel side.
Similar Mustang PartsMore Lug Nuts & Wheel Studs
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
Will this lug nuts fit American Rasing Torq Thrust original 60’s Rims ? Thank you.
They aren't really designed for those wheels - they're for Race Star wheels. You would likely want one of the other options available in our Lug Nuts category: http://www.cjponyparts.com/mustang-lug-nuts-wheel-studs/c/60210050/
Date published: 2015-05-06
Can I mix 10 open end lugs and 10 closed in as set for the 71.99
Unfortunately, we don't have that type of kit available.
Date published: 2015-02-06
Are these rims offset,because I have a problem putting them on my 2012 mustang.
You Might Also Like
CJ's Low Price:$71.99
From:CJ's Low Price:$214.99
From:CJ's Low Price:$349.99