Raybestos Brake Drum Rear 10x1-3/4" V8 1965-1972

Raybestos: 2623
CJ's Low Price:
1474848000 2649
Earn 56 RPM Points What's this?
Raybestos Brake Drum Rear 10x1-3/4" V8 1965-1972

Product Description

Raybestos 10x1-3/4" Rear Brake Drum for 1965, 1966, 1967, 1968, 1969, 1970, 1971 and 1972 Mustangs with a V8 Engine.

Do you need a new rear brake drum for you 1965-1972 Mustang? One that's built to last and delivers OE quality (or better)? If so, you're in luck because CJ Pony Parts carries this premium replacement Rear Brake Drum from Raybestos!

This Raybestos 10x1-3/4" Rear Brake Drum (2623) is an excellent direct fit replacement if you need a reliable and durable rear brake drum for your Pony! It matches OE form, fit and function, and it's meant to be used on 1965-1972 Mustangs with a V8 engine. Each brake drum by Raybestos is inspected and validated for balance, which gives you the peace of mind you deserve knowing your new rear brake drum will work when you need it the most! You'll also enjoy smooth brake operation and a reduction in noise.

Brake Drum Specifications:
Overall Height: 3.31"
Bolt Circle: 4.5"
Bolt Holes: 5

For any Mustang owner that is looking to improve to stopping power from their Pony's braking system, CJ Pony Parts supplies a large selection of Raybestos performance brake products. Raybestos has been fabricating high quality performance brake products for over 100 years and has been setting the benchmark for premium quality brake parts across the rest of the industry!

Order a Raybestos 10x1-3/4" Rear Brake Drum (2623) for your 1965, 1966, 1967, 1968, 1969, 1970, 1971 or 1972 Mustang with a V8 Engine from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Brake Drums  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Raybestos Brake Drum Rear 10x1-3/4" V8 1965-1972 is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from good fit and function Used these drums to rebuild the rear brakes on my driver '65. They fit well and work as expected. The lip on the back outer rim is designed different than the original but that shouldn't affect function other than possibly allow in more water or dust. I am very satisfied with them.
Date published: 2015-12-22
Rated 5 out of 5 by from Worth the money all day! Raybestos.....Outstanding product! Turned them down 30 thousandths and painted them black and perfect. Very HD.
Date published: 2016-02-28
Rated 5 out of 5 by from Great fit No problems with these, arrived well protected and ready to go, fit perfect.
Date published: 2015-12-02
Rated 5 out of 5 by from Perfect Fit Very easy to install. No issues whatsoever, however I painted mine black.
Date published: 2015-12-08
  • 2016-09-26T08:09CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_BD5, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 108.65ms

Product Questions

need brake drum for 1968 Shelby gt350 9" rear end. Was given drums from carquest and not sure if right ones can cross reference be done will be restoring Shelby and needing other parts

Asked by: Jfitchfan
I believe you need a 10 x 3 inch drum, we do not carry any drums that size. They may be found on some of the larger ford products.
Answered by: rk cjpp
Date published: 2016-08-30

If my rear brake pad surface is 1-3/4" wide does that mean my drum is 10 x 1-3/4" too or 10 x 2"

Asked by: Jack67FB
the pad surface is what you are looking at.  a 1.75 inch pad surface will need a 1.75 inch drum.  so 2 inch pads need 2 inch drums etc.  the drum width will be actually larger. but is listed as its matching pad width.  so if we list a 1.75 inch drum that will match a 1.75 inch pad.
Answered by: tom cjpp
Date published: 2016-01-26

Will this drum fit my 1976 Ford Maverick with an 8" differential?

Asked by: David CC
No this will not fit, we do not carry the part you need Raybestos part #2667.
Answered by: rk cjpp
Date published: 2015-10-16

center hole diameter? I have an 8" in a 1940 Ford so I have no idea what it came out of. Most dimensions match a 1968 Mustang except my center hole is 2.77". Can you help?

Asked by: lakebum1245

Is this for 0ne or two drums

Asked by: DDDD
  • 2016-09-26T08:26CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_BD5, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 107.91ms

You Might Also Like