Raybestos Front Brake Drum 10" x 2-1/4" 1965-1973

Raybestos: 1634R
CJ's Low Price:
1469750400 2647
Earn 56 RPM Points What's this?
Raybestos Front Brake Drum 10" x 2-1/4" 1965-1973

Product Description

Raybestos 10" x 2-1/4" Front Brake Drum for 1965-1973 Mustangs.

Raybestos Brake Drums are made from G3000 qualified material for structural integrity and maximum service life, while consistent with ISO/TS16949 quality system standards. Drums are 100% inspected for balance, smooth operation, noise reduction, and better braking performance. This particualr replacement brake drum is designed for a 10" x 2-1/4" front brake drum. Each drum sold individually.

Similar Mustang Parts

similar Mustang parts More Brake Drums  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 305.23ms
  • bvseo-msg: HTTP status code of 403 was returned;

Product Questions

What are the exact measurements of this drum? I know they are for 10 in x 2 in brake shoes but looking for the outer diameter and height.

Asked by: Jack34
The backside of the drum is 12.5 inches, the front side is 10.5 inches and the height is 4 inches.
Answered by: rk cjpp
Date published: 2016-02-17

will these drums fit a 1964 falcon ranchero with the v-8 its a 5 lug 10x21/4" .the stock drum on the mustang video looks like mine but the one they replace it with is different looking are they interchangeable? don't trust these auto parts guys.

Asked by: gees
you can confirm fitment on raybestos's webpage or by contacting them directly.  we specialize in the mustang, and our listing would be a lot longer if we listed every vehicle ford used these on.
Answered by: tom cjpp
Date published: 2016-01-26

How do I measure to know which drums I need for my 1966 coupe? It was originally equip with a 289 and manual drum breaks. 

Asked by: rugbyjon112
Your original front drums for a v8 should be 10 x 2 1/4, the rear should be 10 x 1 3/4, measure the width of the brake shoe contact area and across the diameter of the drum.
Answered by: rk cjpp
Date published: 2015-10-05

Are they made in the US or elsewhere (e.g. China)?

Asked by: Siegfried Schwab
Unsure - depends which of Raybestos facilities they're made in.
Answered by: CJ Pony Parts
Date published: 2015-09-03

I have a 1966 6 cyl and want to make sure these are the correct front drum replacements.  Thanks.

Asked by: DMK1
If you have a 10" x 2-1/4" front brake drum, then these will work.
Answered by: CJ Pony Parts
Date published: 2015-05-22

Do you have the 10" backing plates for the 10" front drums which are used with the 289 engine?

Asked by: dmonroe45
No, unfortunately, we don't have those available.
Answered by: CJ Pony Parts
Date published: 2015-04-06

65 Mustang brake drum concern NEW (Raybestos 1634R): 4" deep (outside), 2 7/8" inside; 12 1/2" outside dia. OLD (C3DA1125B): 3 1/4" deep (outside), 2 5/8" inside; 11 5/8" outside dia. They are both 10" inside dia. Will new work?

Asked by: Hummer

I just ordered this drum for my 65 conv. I see conversation that the backside is 12.5 inches. The drum I just removed is 11.75 inches. Why would my drum be so much smaller?

Asked by: Hummer
  • 2016-07-29T07:47CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_BD3, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 6.29ms

You Might Also Like