Rear Disc Brake Conversion Kit for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 9" Big Bearing Rear Axle and Staggered Shocks.
If you have your 1965-1973 Mustang is equipped with staggered shocks, don't worry about trying to modify individual aspects of your rear brakes to fit & function with your shocks. Pick up this Rear Disc Brake Conversion Kit that is designed specifically to work with your staggered shocks and 9" big bearing rear axle. You'll be shocked to see how much more braking power your classic Mustang obtains to improve its overall braking performance.
- 11.25" Plain Brake Rotors
- Loaded Single Piston Cast Aluminum Calipers
- Brake Pads
- Flex Hoses
- Caliper to Axle Housing Mounting Brackets
- Weld-On Hose Brackets
- Parking Brake Cables
- Correct Mounting Hardware
This rear disc brake conversion kit will take your vintage Pony's overall stopping power to a whole new level. The kit features plain brake rotors that have an 11.25" diameter, as well as loaded single piston calipers that have a cast aluminum finish. You'll also receive new brake pads and hoses that will attach to your existing hydraulic system. These brakes will come with a parking brake function that is built-in within the calipers.
Coming with rear cables to tie into your existing cable system, this conversion will work with most rear ends, whether standard or aftermarket. Finally, you'll receive all of the correct brackets, spacers and hardware to properly upgrade your Mustang’s rear brakes to fit with your staggered shocks.
*This kit is designed for Mustangs with have a 9" big bearing rear axle ONLY.
Please Note: This rear disc brake conversion kit will ONLY fit Mustangs that ARE equipped with staggered shocks.
Purchase this Rear Disc Brake Conversion Kit for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a 9" Big Bearing Rear Axle and Staggered Shocks from CJ Pony Parts today!
Similar Mustang PartsMore Mustang Parts
Product ReviewsWrite a review
I would like to purchase the calipers and brake cables only if possible
Hi, we nedd the parking cables for this model conversion kit to Mustang 1965
do I need to change out my rear axle studs to install this disc SSBC brake replacement kit?
You Might Also Like
From: /** Note: This is used for related configurable parts to properly display price w/o regular price */?>Special Price:$386.74
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$760.99
From: /** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$599.99