Set of Red Upper & Lower Rear Tubular Control Arms for all 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 and 1998 Mustangs.If you like to drive your Mustang fast, hard and loud, you may have noticed the stock control arms just can't cut it. The factory stamped steel control arms are just fine for the everyday casual driver, but the spirited driver needs something a bit more durable. This set of Red Upper & Lower Rear Tubular Control Arms for all 1979-1998 Mustangs are just what you need!
These replacement tubular control arms will fit directly in place and swap out the old factory stamped steel control arms in all 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 and 1998 Mustangs. This control arms in this kit are constructed from brawny, reliable tubular steel. Thick and stout, these arms provide the support and firmness in the suspension you want, while the bright, bold red paint adds a touch of flair and style to this upgrade.
This kit includes mounting hardware as well as new, upgraded polyurethane bushings that provide stiff, rigid support for a dramatically increased overall performance. These hard bushings and strong control arms will help reduce the wheel hop resulting from weaker arms bending. The reinforcement and augmented strength added by this kit will improve your Mustang's launches and heighten the control and precision of handling and maneuvering.
Don't be content to settle with the stock control arms that tend to deflect, flex and bow during feisty, vigorous driving. CJ Pony Parts has hundreds of suspension parts for your Mustang so you can make the necessary upgrades to feel confident, safe and smart, when you really lay into her and push your pony to the extreme!
Similar Mustang PartsMore Mustang Rear Control Arms
i too used the bolts in the kit and find that my rear also has a bad clunk i will order new bolts like the review before me did. but construction wise better than upr.
The overall construction of the control arms is very good. However the mount hardware that comes with them is a safety concern for me. The stock fox body control arm bolts are m12x1.75x110 and m12x1.75x90 and are grade 10.9. The hardware that comes with this kit is a grade of 8.8, and are not a close tolerance fit like they should be. They don't tell you that when looking at the ad. If like me, my factory bolts were absolutely destroyed from corrosion. I installed the control arms and new hardware, only to find that now in-between shifts, I get a clunking. I ended up ordering the correct size bolts at a local bolt/nut distributor and plan on installing the correct hardware once they arrive. For the money the arms are worth it. But throwing inferior and incorrect hardware I think is a safety concern. Why even include the hardware if it's not the correct grade/tensile strength? FACTORY is 10.9, not 8.8. This needs to be fixed.
It looks very good and sturdy, installation was a breeze with no issues and they look great. However, they squeak horribly over any little bump, greased it a couple of times to double check. Maybe its the bushings it comes with, I can't figure it out
You Might Also Like
CJ's Low Price:$249.25
CJ's Low Price:$371.85
CJ's Low Price:$199.99
CJ's Low Price:$48.99