Redline Tuning Bolt-In QuickLIFT Plus Hood Strut Kit for the 2013, 2014, 2015 and 2016 Focus ST and 2016-2017 Focus RS.
Everyone loves a clean engine bay, but they don't love a prop rod obstructing the view. Redline Tuning 21-11025-02 uses two gas springs that lift and hold your hood without the need for a poorly placed prop rod. Simply start to lift your hood and let the QuickLIFT system take over. The hood struts will lift and firmly hold the hood at it's raised position. After the installation of Redline Tuning hood struts, you will never have to worry about the wind or bumping your hood.
The Redline Tuning hood strut kit 21-11025-02 features true bolt-in installation. The result is a patented bolt-in design that utilizes factory bolts to mount brackets which attach to the struts. Redline Tuning doesn't use off the shelf parts. The struts are manufactured to different specifications for each vehicle application. Exclusive end-of-force dampening slows the rate of extension over the final inches of travel which eliminates any stress on the hood. QuickLIFT systems work with any hood so you can still use the hood struts if you upgrade to an aftermarket hood.
QuickLIFT PLUS Features:
- Black e-coated custom valved gas springs, made specifically for each application
- Progressive, slow release system; final few inches of operation, gas springs slow down extending rate allowing for a fluid lifting process
- Black powder-coated hardware
- Full color installation manual
Order a Redline Tuning QuickLIFT Plus Bolt-In Hood Strut Kit for your 2013, 2014, 2015 or 2016 Focus ST or 2016-2017 Focus RS from CJ Pony Parts today!
Product ReviewsWrite a review
Hello, Do you ship to Portugal? What is the cost of transportation? I do not pay customs fees? Regards, Pedro Dias
Will this strut kit fit a UK version of the focus ST 2015 facelift model
will this strut kit void my warranty
Will Hood Strut Kit work on a 2015 Mustang?
do you ship to australia
Will it also fit an ordinary 2012 Focus ?
Hi. What is the difference between the plus and the elite versions of the hood lift strut kit. Thanks. Mike
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$129.99
MagnaFlow Cat-Back Exhaust System 2-1/2" With 4-1/2" Polished Tips Stainless Steel Focus ST 2013-2017/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$711.23
From: /** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$209.00
Unlike some other kits on the market, the Redline Tuning Kit is 100% bolt on, and includes these two struts, two brackets that mount on your fenders and two brackets going to bolt to your hood hinges. For this installation, you need a 1/4-inch ratchet, 10-millimeter socket and some wire cutters.
We're going to start by removing the two nuts for the hood hinge. Ford does paint these on the car so you expect a little bit of paint to come off. You want to install the bracket with the stud facing towards the hinge towards the outside of the car. Now for the fender mount bracket, we're going to remove this bolt here.
Now, we're going to install the bracket with the stud facing the engine bay and the Redline Tuning lettering facing up. Next step, which is only on the passenger side, is to reroute this hose here for your windshield washers. It's going to have to go underneath this bracket so that way the body of the strut doesn't hit it. Pull here to release and lift up on this whole bracket by pushing this clip together. Release back here, on the inside, and then clip it back down.
Now, we're going to install the strut itself. You always want to install with the body upward. Once you've repeated the process on the driver side, the last part of the installation is going to be clearance to this bracket right here where this is going to touch. As you bring it down you're going to see the body's going to hit the plastic right there. That's why we're going to have to clearance it. Now, we see where it's going to hit. You'll need to get some wire cutters and just trim that section out. Now do the same thing on the driver side. Once you clearance both sides, your last step is to remove the factory prop rod, and your installation's finished.
Now that everything's clearanced, we'll bring our hood down, make sure we're good. Everything's good there. Lift it back up. With Redline Hood Struts, you'll only have to pull it about half way up, then it'll actually take it slowly the rest of the way for you. Installation should only take you around 15 to 20 minutes. You'll be back on the road in no time.