Repair panel for the passenger side lower cowl panel on all 1965-1968 Mustangs.Measures 15-1/2"x18". In order to install this you must first remove the upper cowl panel by drilling out the spot welds. Then this panel gets welded in place after cutting the old one.
Product ReviewsWrite a review
Repair Panel Lower Cowl Passenger Side 1965-1968 is rated out of 5 by 1.
Rated 5 out of 5 by Pantoja212 from Fitted Perfect This fitted great and even had a little extra metal for fitting.
Date published: 2015-01-07
By Bill Tumas: We're here with lower cowl patch panels for your '64 through '68 Mustang. The lower cowl area around the hat here is probably one of the most common places that early Mustangs rust out due to drain holes being blocked. These patch panels will weld in place in your lower cowl to repair the damage on your '64 through '68 Mustang. The panels come ready to weld in place with the bracket for your fresh air vent and a passenger side bracket pre-welded in place. If you're getting water in the floor of your '64 through '68 Mustang after washing it or when driving in the rain, there's a strong possibility that your cowl is leaking and these patch panels can be used to repair it.