Retro Sound Radio AM/FM Chrome Retro Classic 1965-1966

Retro Sound: RC-900C W/ RS-6466MUSTKT
MSRP: $170.00
CJ's Low Price:
$164.99
This item is a Kit A kit is comprised of multiple parts1404864000
Earn 164 RPM Points What's this?
Retro Sound Radio  AM/FM Chrome Retro Classic 1965-1966
Play Retro Sound Radio  AM/FM Chrome Retro Classic 1965-1966 Video 1

Product Description

Retro Sound Retro Classic Chrome AM/FM Radio for all 1965-1966 Mustang.

Get back to the basics with this Retro Classic CS-900CAM/FM radio and its convenient 30 presets, one auxiliary port on the back, a patent pending InfiniMount shaft & bracket system and of course superior installation flexibility.

This Retro Classic radio for your 1965-1966 Mustang with an AM/FM Tuner and rear auxiliary input was created to meet the needs of classic car enthusiasts for a radio that maintains the classic in dash look of the vehicle while offering modern playback capabilities from today's digital music sources. Our New Retro Classic radios have all the quality of the Model One radio, but don't have all of the extra features.

General Features:
- AM/FM Tuner w/ 30 Presets
- Built-in amplifier (18 watts RMS/40 watts peak x 4 channels)
- InfiniMount shaft/bracket system for maximum installation flexibility!
- Authentic push-button styling
- White LCD illumination color
- Large, brighter display
- Compatible with all RetroSound® vehicle specific bezel, plate and knob kits
- Electronic Clock Function
- Selectable USA/EU/Japan/AUS/RUS tuner frequencies

Audio features:
- Three EQ presets plus user-controlled bass/treble/fader/balance adjustment
- Loudness Control

Expandability:
- Inputs: Front mounted Auxiliary input
- Outputs: 4-channel preamp outputs (front, rear)
- Separate Power Antenna & Amp turn on leads
This is a breakthrough classic car radio offering flexible mounting options with "InfiniMount" shaft/bracket system (patent pending), There's even a front mounted auxiliary input so you can connect your ipod, satellite unit, or any device that has a headphone jack on it! You can also purchase an optional 94" remote mount infrared "eye" which allows for "hide away" placement of the Retro Classic Radio, giving you the option of a completely stock appearance. Modern Sound now in an authentic appearance for your Classic 1965 or 1966 Mustang!

Similar Mustang Parts

similar mustang parts More Mustang Radios  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Amazing Radio
Even with my old and beat up 6x9s in the rear tray this radio still sounds amazing. The radio is more than loud enough to be heard even at freeway speeds without even having to turn the volume up half way. Bought a Scott Drake Shorty Antenna with it and radio stations come in crystal clear. The controls can be a bit confusing at first with all the options it has, but the manual explains everything very clearly. I will be ordering dash speakers soon and maybe kick panel speakers sometime in the future. Would defiantly recommend to anyone.
Wes February 11, 2014
Cool radio!
This radio looks great and gives you the ability to use your MP3/Ipod/Iphone player. The previous owner of my 66 Mustang cut my dash to install a DIN radio. The rest of the interior of the car was nice so I didn't want to strip it to weld in a replacement plate. I bought a radio delete panel, made some measurements, and with a dremmel tool, made a cover that housed this radio. It works well and looks good. Installation is easy with good instructions and the wires labled. Your power source on the mustang will work fine as long as your stock regulator is working. I routed an auxillary stereo plug down into the ashtray. When I want to play some jams off my iphone, I just pull out the ashtray and plug it in. I can also call and get navigation using Siri. Sound is a little weak, but is adequate. I was thinking of getting an amp but decided not to since the sound is decent and I like listening to my exhaust more! I installed this with Pioneer rear speakers and bought some kicker panels with built in spe
April 29, 2013
2 Results

Product Video

By Bill Tumas: Today we're going to be installing a classic radio from Retro Sound in our 1967 Mustang convertible. Retro Sound offers three models that will fit all '64 through '86 Mustangs using their patented InfiniMount system, which allows for superior installation flexibility. All of their radios are going to feature AM/FM/RDS tuners with 30 presets, four-channel amplification, auxiliary inputs, as well as pre-outs.

Let's take a look at the three different models and some of their specific features. This is the Classic Chrome Retro Sound radio but see how small the chassis is. By using a small chassis, as well as putting these control stalks on cables allows for an infinite amount of ways to mount this radio. All Retro Sound Radios have removable power, as well as removable speaker plugs, as well as four-channel pre-outs, and an auxiliary input. This particular radio has a 50 watt x 4 amplifier built in.

This is the Model One radio. It's available in either a black or a chrome face and has upgraded LCD display. It also comes with a remote control and this mountable box, which will take both a USB or auxiliary input.

This is the Retro Sound Zuma that we'll be installing in our '67 Mustang. This radio features a 25 x 4 amplifier, USB, as well as auxiliary inputs, and a pushbutton front for that authentic vintage look. The beauty of the InfiniMount system is it allows you to pick out the radio that fits your needs and you just order the correct knob and bezel kit to install it in your vehicle.

For this installation, you'll need a Phillips head screwdriver, 3/8-inch ratchet, 9/16-inch socket, 1/2-inch socket, solderless connects or a solder and soldering iron, crimping tool, wire strippers, and a Multi Meter.

As you can see our '67 convertible is still rocking the original AM radio, long overdue for an upgrade. The first step is to remove the radio bezel, the four Phillips head screws holding the bezel to the dash. That releases the radio from the dash. In our case it's still attached. You'll want to look underneath, and you can see there's a back strap holding to the bottom of the dash. We'll remove that next. Now our radio will slide out.

You want to start by disconnecting your antenna and then disconnect the two harnesses to wire up the radio. This Mustang still had the original radio that looked like it had never been touched. It still has the original AM speaker as well. For the new Retro Sound stereo the AM speaker is just not going to cut it, so we're going to pull that out and put a stereo speaker in as well.

Check this out. This is something every Mustang owner dreams of finding; this is the original build sheet for this car, still tied up inside the dash on the original wiring. Wow, check that out. The factory speaker is held in place by two nuts you'll have to remove to get it out. You'll want to hold it in place with the other hand and loosen the nuts, and then slide it out.

Our dual voice call stereo replacement speaker is going to be a huge improvement over the original paper AM speaker. The original plugs only have two wires coming out of them. Our new radio is going to require three. One of these is going to be a 12-volt switched, which is what we're going to need. The other one is for illumination for the original radio, we're not going to use that one at all. To figure it out we want to turn the key to the on position and check to see which one is getting 12 volts.

You can see the yellow wire is giving us 12 volts with the key on, that's going to be our 12-volt switched. Now that we've figured out our 12-volt switched power we're going to ground it through the chassis as well. It just leaves a 12-volt constant. Thankfully, in our '67 the 12-volt constant will be right next-door here at the cigarette lighter. You'll get a constant power there; hook up all of our wires to our new stereo.

This is the power harness for our Retro Sound radio. We'll be using the ground, 12-volt switched and 12-volt constant. The power antenna and the remote amp turn on are not used; we're just going to put them aside for now. We're going to use this original style bullet connector so we don't have to cut the harness for our stereo. We're going to use a wiretap to tap into the power going to our cigarette lighter. To get easier access to the cigarette lighter, we're going to pull the ashtray out.

Now we've found both of our 12-volt sources you want to make sure you disconnect your battery before you tap into any of the wires, particularly the constant lead. Now we're going to install the bullet connector to our switch lead. Just put all this up to the stereo location. Now we have our constant and our switched connected, we've got our wires here for our speaker. Now we're going to go install the new stereo into the original bezel.

Now we've got to remove our original radio from our bezel. If the original bezel has been modified or is in poor shape now is a good time to replace it. Ours isn't too bad and so we are going to keep it and just remove the stereo. The first step is to pull these knobs off. They'll simply slide right off the nut. Next, this little plastic retainer has to come off. There is a retaining nut on each side that you remove next. Usually they're only hand tight. Get them both off and remove your bezel from your radio.

Our next step is to fit our Retro Sound radio to the original bezel. Because of the flexibility of their InfiniMount system there's a decent amount of hardware that comes with it. The first step is to put these brackets onto the side of the radio. The brackets are stamped with right and left to make sure you put it on the correct side. At this point you'll just want to make it finger tight, because you're going to have to adjust it.

Now we're going to mock the radio up on our bezel to get an idea where these brackets need to be before we tighten them down. We'll take the supplied trim for the radio and slide it over. These factory pieces are actually two different lengths. We want to make sure the brackets on both sides is off that a little bit so we have room for the shaft itself. Slide this one back there and line that one up there and tighten them down.

Now we're going to remove it from the bezel and we'll line up the shafts. Next we're going to mount the control shafts to our bracket. The first thing you want to do is remove the rubber sleeve they come with for protection in shipping. Grab one of the supplied brackets, these are not side specific, it doesn't matter which one goes on which side. Slide the bracket over, one small washer and one of the supplied nuts, and again at this point only finger tight. We're going to once again use the factory bezel to get the proper alignment before we tighten them down.

We're going to line it up with our original bezel again, use a 1/2-inch socket to tighten them down, and we want to double check they're still lined up properly. We're ready for the next step. Now that we have these shafts tightened down it's time to put the radio into the bezel. Due to the different lengths one side fits flush and the other side has a gap. There's supplied additional hardware we're going to fill that gap up. Slide another nut over that shaft. We're going to get it lined up so that it's just resting on the factory edge of the bezel there and we're going to tighten the nuts to the front. Install a large washer on each side and then another mounting nut.

Make sure both sides are nice and snug. We don't want to tighten them too tight, just a little beyond finger tight on them. Once you've finished attaching the radio to the bezel make sure the control shafts are plugged to the radio before you put it in the car. Now the last step before we put it in is to install the supplied knobs. Now we're ready to reinstall the radio back in our car.

Before we can try the radio we have a couple more connections we've got to make. We need to hook the speakers up to the removable speaker harness provided with the radio and we're going to put an additional ground wire on it as well. The factory radio grounds through the chassis. You can do this with a modern radio, but finding a good ground behind the dash is probably a better idea. We're going to ground through these bolts over here that's part of the dash bracket.

We're going to use these solderless connectors for our speaker wires. The wires are labeled both left and right and positive and negative. Match them up to the corresponding wires in your dash. Now that our connections are made, we're ready to try out our new radio. Before we put it back in the dash, we're going to plug everything in, hook our battery back up and test the radio.

Turn our key on. There we go. To turn it off, just hold this button down. We're ready to bolt it back in the dash.

Not only does a Retro Sound radio look great in our '67 Convertible, it sounds great too. Installation time will be roughly one to two hours depending on speakers. You'll be back on the road cranking the tunes in no time.