Pair of LED Reverse Light Bulbs for all 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 F-150s and F-150 Raptors or Pair of LED Cargo Bulbs for 2011, 2012, 2013, 2014, 2015, 2016 and 2017 F-150s.
Looking to continue updating the exterior bulb assembly or your F-150? Then don't pass up on this unique pair of LED Bulbs that can act as either Reverse Light Bulbs for your 2006-2014 F-150 & F-150 Raptor or as Cargo Bulbs for your 2011-2017 F-150. No matter where you decide to put them, these light bulbs will increase the brightness coming from your truck, especially at night, for a fantastic upgrade.
Features & Benefits:
- Fits as Reverse Lights or Cargo Lights
- HP36 LED Bulb Design
- Projects Crisp & Cool White Hue
- Aluminum Base with Non-Polar Configuration
- 210 Lumens
- Full 360 Degree Illumination
- Increased Brightness
- Pair for Driver and Passenger Side
- Simple Installation
These bulbs are designed to mount into place as your F-150's reverse lights or cargo lights. Each bulb has an HP36 LED design that will illuminate a crisp, bright white hue to the maximum amount of light output. The HP36 bulb design features a full 360 degree illumination with 36 high-power Samsung LEDs within an aluminum base for optimum heat sinking. The non-polar configuration of these bulbs will make for an easy installation onto your truck. Completely sold as a pair, you'll be able to update both the driver and passenger side of your F-150.
With several great options on the market today, CJ Pony Parts stands behind the premium selection of top-notch LEDs available. We offer you just about anything from headlight bulbs to turn signal and marker lights. With the choices that CJ Pony Parts brings to you, you'll have the ability to go from mild to wild and get the most out of your easy to install LED bulb purchase.
What are you waiting for? Order a Pair of LED Reverse Light Bulbs for your 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 or 2014 F-150 or F-150 Raptor or Pair of LED Cargo Bulbs for your 2011, 2012, 2013, 2014, 2015, 2016 or 2017 F-150 from CJ Pony Parts today!
Product ReviewsWrite a review
Are these designed to fit the 2010 Ford Raptor cargo light also? I see that you only list it as fitting the 2011 on up Ford F-150s as a cargo light upgrade.
Does this fit a 2016 F150 factory taillight reverse bulb socket without any changes?
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$108.00
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$9.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$10.80
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$18.00
To install these new LED cargo lights which will be going here and here, we need to remove this whole third brake light assembly using a T20 torques bit. These are the T20 bolts that we will be removing. Now, you don't have to do this next part, but just for the sake of the video, we're going to completely take off the third brake light assembly. Installing the new LED bulbs is very simple. Just simply grab the old bulb, wiggle it out, take the new LED bulb and push it in, Now, we're going to test this bulb to make sure it's actually working. If it's not working, simply pull it out, give it a twist, and then put it back in. It should be working properly.
To test these bulbs, all you have to do is open up the door and it's working. Now, we can reinstall the whole assembly. Now that both lights are working, we can reinstall the third brake light assembly. There are two tabs on this light that you need to line up before installing the bolts. Make sure you line them up, then you can reinstall the four bolts.
Now that all four bolts are tightened, your installation is complete. Here you can see a side-by-side comparison of the LED versus the incandescent bulb. On the driver’s side, we have the new LED cargo light and on the passenger side is the incandescent bulb. The LED bulb is much brighter and it looks a lot better than incandescent bulb. Our LED cargo lights are installed. They're a lot brighter and look way better than the original bulbs. All you'll need for this install is a T20 torques bit or a 7 millimeter socket. Installation should take ten to fifteen minutes and before you know it, you'll be heading down the road.