Ridetech Level 3 Complete Coilover Suspension System for 1967, 1968, 1969 and 1970 Mustangs.Ridetech doesn't just sell air suspension. They have become a quick leader in the industry by offering all types of suspension parts and kits. Ridetech coilovers provide the ultimate ride quality, handling performance and simplicity. TQ (Track Quality) shocks offer remote reservoirs and triple adjustability compared to the single adjustable HQ series shocks. Tune rebound just like the HQ shock, but also change high and low speed compression adjustments. Updating the rear suspension is a full bolt-on 4-link setup. The StrongArm tubular control arms improve suspension geometry and handling. Aiding the front suspension is A Musclebar.
- TQ Coilover Kit
- Bolt-on 4-Link Rear Suspension
- Front Sway Bar
Mono-tube shock construction provides superior fade free performance and great ride quality. A 5/8" chrome shock shaft moves a 1.834" piston which dampens suspension travel. Oil leakage is eliminated by use of a double sealed rod guide with a dust cover. Adjusting the height adjuster is simple thanks to a unique clamp and finer thread. Ridetech doesn't use a set screw as it will ruin threads on the shock body. Includes CNC machined billet hardware and 1/2" bore x 1" kevlar lined bearings for noise free operation.
Ridetech uses high quality 2-1/2" coil springs made right in Indiana by HyperCo. HyperCo uses CNC'd cold wound high tensile premium steel. This lessens weight, resists bowing and increases travel. Ridetech engineers the spring rates to help your car handle to the best of its abilities.
To improve suspension geometry and handling Ridetech created their StrongArm tubular control arms. Optimized ball joint angle ensures no binding during extreme suspension travel. StrongArms are required for proper coilover placement. .219" wall DOM tubing is jig welded for a proper fit and long lasting strength and reliability. A black powder coated finish creates lasting appearance and protection.
Ridetech's bolt-on 4-link setup typically lowers a Mustang's ride height by approximately two inches. This new stance will give your Mustang a great look while lowering the car and increasing handling aspects. When a vehicle is lowered, so is its center of gravity which prevent body roll for better handling and cornering performance. The 4-link bars offer more precise positioning of the rear axle to eliminate flexing and increase stability through corners. Standard polyurethane bushings fight deflection while decreasing a harsh ride and road noise.
Ridetech's Musclebar front sway bar features increased bar diameter, polyurethane bushings and appropriate attachment links. The Musclebar was developed specifically for lowered vehicles and will greatly enhance the cornering performance of your Mustang. Improve body roll and make your car driver better and corner flatter with the addition of this bolt-on sway bar. Ground clearance and oil pan clearance issues are minimized while allowing more tire clearance. PosiLink end links feature ball joint style connections which allows bind free operation through an extremely wide range of motion. Features 360 rotation and 45 misalignment. The durable design will outlast traditional bushing style connectors.
Product ReviewsWrite a review
Would this set up interfer with exhaust clearence
You will most likely need to modify the tailpipes or have a custom set made.
Date published: 2016-12-12
will this kit allow for the strut towers to be removed to provide more clearance in the engine bay? thus providing enough clearance for a 5.0 4v motor.
No, you still need the strut towers.
Date published: 2015-08-06
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$6,200.00
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$9,550.00
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$2,000.00